Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.

Sledované položky Prihlásiť sa
Black 97 by 33 mm blower fan with three-pin connector

Zyvpee

Zyvpee BFB1012M 5J60R 97x33mm 12V .85A 3-pin blower case fan

SKU CH-0M72-XVS2Y

A 97x33mm DC blower with ball bearing and 3-pin connector runs at 12V .85A for server or case cooling

  • TypeCase Fan
  • CompatibilityCase
  • Fan Size100mm
  • Bearing TypeBall
  • Power Connector3 Pin
  • ColorBlack
  • High airflow for tight server chassis with 97 x 33 mm blower design
  • Reliable long-life operation using ball-bearing motor
  • Direct 12 V DC power via standard three-pin connector
  • Compact 100 mm class fits 1U and blade systems
  • Sturdy black frame withstands continuous high-RPM duty

Compact server blower for tight chassis

The Zyvpee BFB1012M is a 100 mm dc blower designed for server and workstation cases where airflow must move through restricted channels. It suits builders who need directed cooling for dense component layouts rather than open-air circulation.

Straightforward 3-pin mounting with ball bearing

Installation uses a standard three-pin power connector that plugs directly into a motherboard or fan controller header. The ball bearing supports continuous operation, though the 12 V .85 A draw means the header must supply sufficient current without voltage drop.

Verify clearance and voltage before ordering

Measure the available slot to confirm the 97 by 33 mm footprint fits your chassis, as this blower is thicker than typical slim fans. Ensure your system provides a 12 V three-pin header rated for at least .85 A; proprietary or 5 V headers will not drive the motor correctly.

Prednosti

  • High airflow for tight server chassis with 97 x 33 mm blower design
  • Reliable long-life operation using ball-bearing motor
  • Direct 12 V DC power via standard three-pin connector
  • Compact 100 mm class fits 1U and blade systems
  • Sturdy black frame withstands continuous high-RPM duty

Špecifikácie

BrandZyvpee
SeriesBFB1012M
ModelBFB1012M
TypeCase Fan
CompatibilityCase
Fan Size100mm
Bearing TypeBall
Power Connector3 Pin
ColorBlack
LEDNon-LED
Featuresdc blower
Dimensions97 * 33mm
Package Contentsrefer to title

Otázky k tomuto produktu

How can I verify the 12V .85A blower is spinning correctly after installation?

Connect the 3-pin connector to a motherboard header or fan controller, power on the system, and confirm the fan RPM appears in BIOS or monitoring software while feeling airflow from the 97x33mm exhaust.

What comes with the BFB1012M 5J60R and do I need any extra cables or mounts?

The package includes the 100mm ball-bearing blower with its attached 3-wire lead; mounting screws and any PWM adapters are not included and must be sourced separately.

Which version of the 97x33mm Delta blower should I choose for a 12V server chassis?

Select the BFB1012M 5J60R rated at 12V .85A with a 3-pin connector; it matches the 10cm form factor and voltage required for compatible server coolers.

Aj v tomto oddelení

Zákazníci tiež porovnávali

Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.