Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.

Sledované položky Prihlásiť sa
Black 110mm blower case fan with 4-pin connector

Zyvpee

Zyvpee BL4447-04W-B49-71 110mm blower case fan

SKU CH-DP19-N3QV1

A 110 mm blower fan with 4-pin PWM control and ball bearings for server power supplies

  • TypeCase Fan
  • Fan Size110mm
  • Bearing TypeBall
  • Power Connector4 Pin
  • ColorBlack
  • LEDNon-LED
  • 110 mm blower design targets tight server spaces
  • Ball bearing handles continuous 12 V 2.0 A operation
  • Four-pin connector enables PWM speed control
  • 28 mm thick frame fits 1U and blade chassis
  • Non-LED black finish keeps rack lighting clean

Zyvpee 110mm Blower Fan

The Zyvpee BL4447-04W-B49-71 is a 110mm blower-style case fan designed for server power supplies and compact chassis where directed airflow is required. It operates on 12V DC with a 2.0A current draw and uses a four-pin power connector for PWM control. The unit features a black frame and non-LED construction with ball bearing internals.

Installation Notes

The fan measures 110 by 28mm and uses a standard four-pin connector that fits typical server or motherboard headers. Ensure the mounting holes align with 110mm spacing and that the blower orientation matches the intended exhaust path. The ball bearing design reduces friction but requires correct voltage polarity to avoid damage.

Sustained Operation

Under continuous load the ball bearing maintains consistent rotation without the wear patterns common in sleeve alternatives. The 12V 2.0A rating supports steady airflow for server power supply cooling over extended periods. Blower geometry focuses air through restricted channels rather than open fins, sustaining pressure where axial fans would stall.

Prednosti

  • 110 mm blower design targets tight server spaces
  • Ball bearing handles continuous 12 V 2.0 A operation
  • Four-pin connector enables PWM speed control
  • 28 mm thick frame fits 1U and blade chassis
  • Non-LED black finish keeps rack lighting clean

Špecifikácie

BrandZyvpee
SeriesBL4447-04W-B49-71
ModelBL4447-04W-B49-71
TypeCase Fan
Fan Size110mm
Bearing TypeBall
Power Connector4 Pin
ColorBlack
LEDNon-LED
FeaturesBlower
Dimensions110*28MM

Otázky k tomuto produktu

How can I verify the blower fan is spinning correctly after connecting the 4-pin power connector?

Check that the 4-pin connector is fully seated on the motherboard or fan controller header, then confirm the fan RPM appears in BIOS or monitoring software at the expected 12V supply.

What comes in the box with the Zyvpee BL4447-04W-B49-71 and do I need any extra mounting hardware?

The package includes the 110mm blower fan with its attached 4-wire 4-pin cable; mounting screws for the 110mm frame are not supplied and must be purchased separately.

Which version of the 110mm blower should I choose for a server power supply that requires 2.0A at 12V?

Select the BL4447-04W-B49-71 model rated at 12V 2.0A with ball bearing and 4-pin PWM control to match the server power supply specification.

Aj v tomto oddelení

Zákazníci tiež porovnávali

Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.