Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.

Sledované položky Prihlásiť sa
Black 170mm case fan with 3-pin connector, 51mm thick

Zyvpee

Zyvpee NIDEC TA600DC 17CM A34438-59 EX P/N 956500 24V 1.4A 3 Pin Case Fan

SKU CH-FN8J-PY5Q2

A 170 mm dual-ball-bearing case fan running at 24 V and 1.4 A with a three-pin connector for inverter cooling

  • TypeCase Fan
  • CompatibilityCase
  • Fan Size170mm
  • Bearing Type2 Ball
  • Power Connector3 Pin
  • ColorBlack
  • 170 mm diameter moves more air at lower RPM
  • 2-ball bearing rated for long continuous operation
  • 24 V 1.4 A draw suits industrial and UPS chassis
  • 3-pin connector provides simple speed monitoring
  • 172 × 51 mm frame fits standard 17 cm mount points

24 V 170 mm Server Fan

The Zyvpee NIDEC TA600DC is a 170 mm case fan that runs on a 24 V supply and draws 1.4 A through a three-pin connector. Its frame measures 172 by 51 mm and uses a dual-ball bearing for continuous operation. The black, non-LED housing is built for inverter and UPS cooling rather than desktop aesthetics.

Industrial Cooling Only

This unit suits technicians who maintain rack-mounted power equipment, inverter enclosures or UPS modules that provide a native 24 V fan header. It will not fit standard PC chassis fan mounts designed for smaller diameters. Builders assembling a desktop workstation or gaming tower should look elsewhere because the voltage and physical size do not match consumer motherboard headers or case cutouts.

24 V Three-Pin Power Requirement

The single specification that decides fitment is the 24 V three-pin power interface; the fan only operates when connected to a header or supply that delivers exactly that voltage and pinout. Without a 24 V source the fan will not spin, so verify your equipment provides it before ordering.

Prednosti

  • 170 mm diameter moves more air at lower RPM
  • 2-ball bearing rated for long continuous operation
  • 24 V 1.4 A draw suits industrial and UPS chassis
  • 3-pin connector provides simple speed monitoring
  • 172 × 51 mm frame fits standard 17 cm mount points

Špecifikácie

BrandZyvpee
SeriesA34438-59
ModelA34438-59
TypeCase Fan
CompatibilityCase
Fan Size170mm
Bearing Type2 Ball
Power Connector3 Pin
ColorBlack
LEDNon-LED
FeaturesInverter Cooling
Dimensions172*51

Otázky k tomuto produktu

How often will the 2 ball bearing need replacement in continuous UPS inverter cooling?

The dual ball bearing design is rated for extended continuous operation in inverter cooling duty, typically lasting several years before any service is required.

What thermal limit appears first when the 170 mm fan runs at 24 V 1.4 A all day?

Sustained full-voltage operation reaches the motor winding temperature ceiling before airflow drops, so case ventilation must keep intake air cool.

How much noise and heat does the 172 mm by 51 mm frame produce at 24 V constant load?

At 24 V the NIDEC TA600DC moves high volume air with moderate audible rush; frame surface stays warm but within safe handling range.

Aj v tomto oddelení

Zákazníci tiež porovnávali

Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.