Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.

Spremljani izdelki Prijava
Green 240-pin DDR3 DIMM module without heat spreader

A-Tech

A-Tech 4GB DDR3 1333 PC3-10600 DIMM 998770

SKU CH-03A0-ZZAJG

A 4 GB DDR3 desktop DIMM running at 1333 MHz with CL9 latency and 1.5 V operation

  • Capacity4GB
  • SpeedDDR3 1333 (PC3 10600)
  • Tested Frequency1333
  • CAS LatencyCL9
  • Voltage1.50V
  • ECCNo
  • 4GB capacity expands multitasking headroom for everyday desktop workloads
  • DDR3 1333 MHz speed matches PC3-10600 standard for reliable data throughput
  • CL9 latency at 1.5V delivers stable timing without extra voltage
  • 240-pin unbuffered DIMM fits standard desktop memory slots directly
  • Tested replacement for Mushkin 998770 ensures drop-in compatibility

A-Tech 4GB DDR3 1333 DIMM

This A-Tech module is a 4 GB DDR3 1333 (PC3-10600) desktop DIMM built as a compatible replacement for Mushkin part 998770. It runs at 1333 MHz with CL9 latency at the standard 1.5 V and uses an unbuffered non-ECC design. The 240-pin form factor fits conventional desktop memory slots.

Suitable for DDR3 desktop upgrades

The stick suits owners of DDR3 systems that accept 1.5 V unbuffered non-ECC UDIMMs and need a direct drop-in for the Mushkin 998770 reference. Builds requiring ECC, registered DIMMs, or a different DDR generation cannot use this module and should look elsewhere.

Key spec: 1.5 V DDR3 1333 unbuffered non-ECC

The single specification that decides fit is the combination of DDR3 1333 speed, 1.5 V operating voltage, and unbuffered non-ECC organisation on a 240-pin DIMM. Verify that your motherboard supports those exact parameters before ordering.

Poudarki

  • 4GB capacity expands multitasking headroom for everyday desktop workloads
  • DDR3 1333 MHz speed matches PC3-10600 standard for reliable data throughput
  • CL9 latency at 1.5V delivers stable timing without extra voltage
  • 240-pin unbuffered DIMM fits standard desktop memory slots directly
  • Tested replacement for Mushkin 998770 ensures drop-in compatibility

Specifikacije

BrandA-Tech
SeriesCompatible Replacement for Mushkin
Model998770
Capacity4GB
SpeedDDR3 1333 (PC3 10600)
Tested Frequency1333
CAS LatencyCL9
Voltage1.50V
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor Brand Chipset
Heat SpreaderNo
Features998770
Recommend UseCompatible Replacement for Mushkin 998770

Vprašanja o tem izdelku

Will the 240-pin DDR3 DIMM fit a standard desktop motherboard slot?

Yes, the module uses the standard 240-pin DDR3 DIMM form factor, so it fits any desktop motherboard with a matching DDR3 slot.

Do I need to change any BIOS settings when installing this 1.50V CL9 module?

Install the DIMM with the system powered off; most boards will auto-detect the 1333 MHz speed and CL9 timings at 1.50V without manual changes.

Does the lack of a heat spreader mean I should replace the module sooner?

No, the module runs at standard 1.50V DDR3 voltage without a spreader; it is rated for lifetime use under normal desktop airflow.

Tudi v tem oddelku

Stranke so primerjale tudi te

Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.