Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Green 240-pin DDR3 DIMM module without heat spreader

A-Tech

A-Tech 4GB DDR3 1333 PC3-10600 DIMM 998770

SKU CH-03A0-ZZAJG

A 4 GB DDR3 desktop DIMM running at 1333 MHz with CL9 latency and 1.5 V operation

  • Capacity4GB
  • SpeedDDR3 1333 (PC3 10600)
  • Tested Frequency1333
  • CAS LatencyCL9
  • Voltage1.50V
  • ECCNo
  • 4GB capacity expands multitasking headroom for everyday desktop workloads
  • DDR3 1333 MHz speed matches PC3-10600 standard for reliable data throughput
  • CL9 latency at 1.5V delivers stable timing without extra voltage
  • 240-pin unbuffered DIMM fits standard desktop memory slots directly
  • Tested replacement for Mushkin 998770 ensures drop-in compatibility

A-Tech 4GB DDR3 1333 DIMM

This A-Tech module is a 4 GB DDR3 1333 (PC3-10600) desktop DIMM built as a compatible replacement for Mushkin part 998770. It runs at 1333 MHz with CL9 latency at the standard 1.5 V and uses an unbuffered non-ECC design. The 240-pin form factor fits conventional desktop memory slots.

Suitable for DDR3 desktop upgrades

The stick suits owners of DDR3 systems that accept 1.5 V unbuffered non-ECC UDIMMs and need a direct drop-in for the Mushkin 998770 reference. Builds requiring ECC, registered DIMMs, or a different DDR generation cannot use this module and should look elsewhere.

Key spec: 1.5 V DDR3 1333 unbuffered non-ECC

The single specification that decides fit is the combination of DDR3 1333 speed, 1.5 V operating voltage, and unbuffered non-ECC organisation on a 240-pin DIMM. Verify that your motherboard supports those exact parameters before ordering.

Puncte forte

  • 4GB capacity expands multitasking headroom for everyday desktop workloads
  • DDR3 1333 MHz speed matches PC3-10600 standard for reliable data throughput
  • CL9 latency at 1.5V delivers stable timing without extra voltage
  • 240-pin unbuffered DIMM fits standard desktop memory slots directly
  • Tested replacement for Mushkin 998770 ensures drop-in compatibility

Specificații

BrandA-Tech
SeriesCompatible Replacement for Mushkin
Model998770
Capacity4GB
SpeedDDR3 1333 (PC3 10600)
Tested Frequency1333
CAS LatencyCL9
Voltage1.50V
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor Brand Chipset
Heat SpreaderNo
Features998770
Recommend UseCompatible Replacement for Mushkin 998770

Întrebări despre acest articol

Will the 240-pin DDR3 DIMM fit a standard desktop motherboard slot?

Yes, the module uses the standard 240-pin DDR3 DIMM form factor, so it fits any desktop motherboard with a matching DDR3 slot.

Do I need to change any BIOS settings when installing this 1.50V CL9 module?

Install the DIMM with the system powered off; most boards will auto-detect the 1333 MHz speed and CL9 timings at 1.50V without manual changes.

Does the lack of a heat spreader mean I should replace the module sooner?

No, the module runs at standard 1.50V DDR3 voltage without a spreader; it is rated for lifetime use under normal desktop airflow.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.