Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.

Spremljani izdelki Prijava
Rectangular metal mining unit with four fans and Ethernet port

AFRNDK

AFRNDK A11 Pro ETH 1500Mh mining hardware

SKU CH-R4S8-8SPA0 MPN A11

Ethereum miner delivering 1500 Mh/s on the Ethash algorithm with 2350 W power draw, four fans at 75 dB, and 12 V operation in a 5–45 °C range

  • Crypto AlgorithmEthash algorithm
  • Mining HardwareEthereum
  • Hashrate1500Mh
  • Network ConnectionEthernet
  • Noise level75dB
  • Fan4

Options A11 Pro

Prikaži še 2 konfiguracij

Prečrtane različice obstajajo, vendar tukaj niso na voljo.

  • Delivers 1500 Mh/s Ethash hashrate for Ethereum mining
  • Efficient 1.25 J/Mh energy ratio lowers electricity cost
  • Four fans keep noise at 75 dB for quieter operation
  • Runs on standard 220–240 V supply without special wiring
  • Operates reliably from 5 °C to 45 °C ambient temperature

Mining hardware for Ethereum

The AFRNDK A11 Pro ETH delivers a 1500Mh hashrate on the Ethash algorithm. It is built for operators who mine Ethereum and need a dedicated ASIC unit. The machine connects through Ethernet and runs on a 12V input. Four fans keep the system within a 5 °C to 45 °C operating range.

Build integration and requirements

The unit draws 2350W and must be powered from a 220V to 240V supply. Its 75dB noise level means it suits dedicated mining spaces rather than quiet offices. Humidity tolerance spans 5 % to 95 %. Only an Ethernet link and a suitable high-voltage circuit are needed to start mining.

Suitability and alternatives

This model fits miners targeting Ethereum with a 1.5Gh/s peak hashrate and 1.25j/Mh efficiency. Buyers needing lower power draw, quieter operation, or support for other algorithms should evaluate different hardware. The 2500W maximum consumption figure also demands robust electrical infrastructure.

Poudarki

  • Delivers 1500 Mh/s Ethash hashrate for Ethereum mining
  • Efficient 1.25 J/Mh energy ratio lowers electricity cost
  • Four fans keep noise at 75 dB for quieter operation
  • Runs on standard 220–240 V supply without special wiring
  • Operates reliably from 5 °C to 45 °C ambient temperature

Specifikacije

BrandInnosilicon
ModelA11pro
Crypto AlgorithmEthash algorithm
Mining HardwareEthereum
Hashrate1500Mh
Network ConnectionEthernet
Noise level75dB
Fan4
Power Consumption2350W

Druge različice tega modela

še 5 v isti paleti

Ista družina, različen pomnilnik, hladilnik ali takt — primerjajte, preden se odločite.

Vprašanja o tem izdelku

What is the maximum hashrate the A11 Pro ETH 1500Mh can sustain?

The A11 Pro ETH delivers a maximum hashrate of 1.5Gh/s on the Ethash algorithm.

How loud is the miner when its four fans run continuously?

The unit produces 75dB of noise while the four fans operate at full speed.

What voltage supply must be available before the A11 Pro ETH can start mining?

The miner requires a 220V-240V environment to operate correctly.

Tudi v tem oddelku

Stranke so primerjale tudi te

Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.