Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.

Spremljani izdelki Prijava
Rectangular silver power supply unit 254.6mm by 251.6mm by 63mm weighing 3.6kg

AFRNDK

AFRNDK APW12 12V-15V 200-240V 45dBA 3.6kg mining hardware

SKU CH-E7P1-HDEHD

Bitmain-original APW12 PSU delivers 12–15 V DC at 200–240 V AC input for Antminer S19, S19 Pro and T19 rigs, running at 45 dBA and weighing 3.6 kg

Options APW12 PSU

Prikaži še 2 konfiguracij

Prečrtane različice obstajajo, vendar tukaj niso na voljo.

  • Original Bitmain PSU keeps Antminer 19 series rigs running 24/7/365
  • 200-240 V AC input with 47-63 Hz range suits global mains power
  • 12-15 V DC primary rail at 12.2-12.4 V tolerance delivers stable miner voltage
  • 45 dBA acoustic rating limits noise in dense farm racks
  • 6 kg unit measuring 254.6 mm x 251.6 mm x 63 mm fits standard slots

AFRNDK APW12 power supply for 19-series miners

The AFRNDK APW12 is an original Bitmain power supply unit built for Antminer S19, S19 Pro and T19 models. It accepts 200-240V AC input at 47-63Hz and delivers a 12V-15V DC output with a 12.2V-12.4V rail. The unit measures 254.6mm x 251.6mm x 63mm and weighs 3.6 kg.

Suits operators running 19-series rigs continuously

This PSU matches the voltage and connector requirements of the listed Antminer 19 series units. Buyers with special S19 variants such as S19JL, S19JPEOL, S19JPRO-A, S19A, S19APRO or L7 should verify compatibility before purchase. It is not intended for other miner families or general PC builds.

Direct replacement install with spare-unit planning

Installation follows the standard Antminer PSU swap procedure; no special tools are described in the data. Acoustic output is rated at 45dBA. Keeping spare units on site is advised to avoid downtime during continuous 365-day operation.

Poudarki

  • Original Bitmain PSU keeps Antminer 19 series rigs running 24/7/365
  • 200-240 V AC input with 47-63 Hz range suits global mains power
  • 12-15 V DC primary rail at 12.2-12.4 V tolerance delivers stable miner voltage
  • 45 dBA acoustic rating limits noise in dense farm racks
  • 6 kg unit measuring 254.6 mm x 251.6 mm x 63 mm fits standard slots

Specifikacije

Za ta izdelek še ni objavljenih specifikacij.

Druge različice tega modela

še 5 v isti paleti

Ista družina, različen pomnilnik, hladilnik ali takt — primerjajte, preden se odločite.

Vprašanja o tem izdelku

What miner models does the APW12 12V-15V unit support?

The APW12 is built for Bitmain Antminer 19 series miners including S19, S19 Pro and T19.

Can the APW12 share a 200-240 V circuit with older miners?

Yes, it accepts 200-240 V input at 47-63 Hz, the same mains range used by many earlier Bitmain units.

How do I confirm the APW12 is delivering power correctly after install?

Listen for the 45 dBA fan noise and verify the miner reports stable 12.2-12.4 V on the hash boards.

Tudi v tem oddelku

Stranke so primerjale tudi te

Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.