Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Rectangular silver power supply unit 254.6mm by 251.6mm by 63mm weighing 3.6kg

AFRNDK

AFRNDK APW12 12V-15V 200-240V 45dBA 3.6kg mining hardware

SKU CH-E7P1-HDEHD

Bitmain-original APW12 PSU delivers 12–15 V DC at 200–240 V AC input for Antminer S19, S19 Pro and T19 rigs, running at 45 dBA and weighing 3.6 kg

Options APW12 PSU

Nog 2 configuraties tonen

Doorgestreepte varianten bestaan wel, maar zijn hier niet op voorraad.

  • Original Bitmain PSU keeps Antminer 19 series rigs running 24/7/365
  • 200-240 V AC input with 47-63 Hz range suits global mains power
  • 12-15 V DC primary rail at 12.2-12.4 V tolerance delivers stable miner voltage
  • 45 dBA acoustic rating limits noise in dense farm racks
  • 6 kg unit measuring 254.6 mm x 251.6 mm x 63 mm fits standard slots

AFRNDK APW12 power supply for 19-series miners

The AFRNDK APW12 is an original Bitmain power supply unit built for Antminer S19, S19 Pro and T19 models. It accepts 200-240V AC input at 47-63Hz and delivers a 12V-15V DC output with a 12.2V-12.4V rail. The unit measures 254.6mm x 251.6mm x 63mm and weighs 3.6 kg.

Suits operators running 19-series rigs continuously

This PSU matches the voltage and connector requirements of the listed Antminer 19 series units. Buyers with special S19 variants such as S19JL, S19JPEOL, S19JPRO-A, S19A, S19APRO or L7 should verify compatibility before purchase. It is not intended for other miner families or general PC builds.

Direct replacement install with spare-unit planning

Installation follows the standard Antminer PSU swap procedure; no special tools are described in the data. Acoustic output is rated at 45dBA. Keeping spare units on site is advised to avoid downtime during continuous 365-day operation.

Pluspunten

  • Original Bitmain PSU keeps Antminer 19 series rigs running 24/7/365
  • 200-240 V AC input with 47-63 Hz range suits global mains power
  • 12-15 V DC primary rail at 12.2-12.4 V tolerance delivers stable miner voltage
  • 45 dBA acoustic rating limits noise in dense farm racks
  • 6 kg unit measuring 254.6 mm x 251.6 mm x 63 mm fits standard slots

Specificaties

Voor dit artikel zijn nog geen specificaties gepubliceerd.

Andere versies van dit model

Nog 5 in dezelfde serie

Dezelfde familie, met ander geheugen, andere koeler of kloksnelheid — vergelijk voordat u beslist.

Vragen over dit artikel

What miner models does the APW12 12V-15V unit support?

The APW12 is built for Bitmain Antminer 19 series miners including S19, S19 Pro and T19.

Can the APW12 share a 200-240 V circuit with older miners?

Yes, it accepts 200-240 V input at 47-63 Hz, the same mains range used by many earlier Bitmain units.

How do I confirm the APW12 is delivering power correctly after install?

Listen for the 45 dBA fan noise and verify the miner reports stable 12.2-12.4 V on the hash boards.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.