Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.

Spremljani izdelki Prijava
Ten red PCIe x16 riser cards with 60 cm USB 3.0 cables and 6-pin power connectors

AFRNDK

AFRNDK VER0010s-PLUS PCI-E 16X riser kit 10pcs 60cm

SKU CH-1HHK-WFEMM MPN VER0010s-PLUS

A ten-piece kit of 60 cm PCI-E 16X risers with 8 solid capacitors, 6-pin power and USB 3.0 cables for multi-GPU mining rigs

  • Stable GPU power delivery backed by eight solid capacitors
  • Independent 12 V DC-DC supply with 6-pin connector reduces motherboard load
  • Reliable contact ensured by original imported PCI-E 16X slot connector
  • Signal integrity up to 3 m using multi-layer shielded USB 3.0 cable
  • Flexible placement with soft, easy-to-route USB cable and secure slot buckle

10-piece PCI-E 16X riser kit

This kit contains ten PCI-E 16X riser cards, ten PCI-E 1X cards, ten power cables and ten USB 3.0 cables. Each riser uses a 60 cm shielded cable with eight solid capacitors and a 6-pin power connector. The design targets multi-GPU mining rigs that need flexible card placement.

6-pin power and shielded 60 cm cable

The 6-pin connector draws 12 V power directly from the PSU through an on-board DC-DC circuit, removing load from the motherboard. Multi-layer shielding allows the 60 cm cable to run without signal loss. A locking buckle on each 16X slot secures the graphics card during transport or vibration.

Suited for high-density mining builds

Builders running ten or more cards on a single board benefit from the independent power delivery and long, flexible routing. Operators who need shorter cables, different power connectors or a smaller quantity should look at alternative riser kits.

Poudarki

  • Stable GPU power delivery backed by eight solid capacitors
  • Independent 12 V DC-DC supply with 6-pin connector reduces motherboard load
  • Reliable contact ensured by original imported PCI-E 16X slot connector
  • Signal integrity up to 3 m using multi-layer shielded USB 3.0 cable
  • Flexible placement with soft, easy-to-route USB cable and secure slot buckle

Specifikacije

Za ta izdelek še ni objavljenih specifikacij.

Vprašanja o tem izdelku

How many risers are included in the kit?

The kit contains ten PCI-E 16X cards, ten PCI-E 1X cards, ten power cords and ten USB 3.0 cables.

What is the length of each USB 3.0 cable?

Each cable is 60 cm long, allowing flexible placement of graphics cards inside the chassis.

Does the riser draw power from the motherboard or from a separate connector?

A 6-pin connector on the adapter card supplies 12 V power directly, so the motherboard is not loaded by the graphics cards.

Tudi v tem oddelku

Stranke so primerjale tudi te

Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.