Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.

Spremljani izdelki Prijava
Atermiter AT-X99 motherboard with Xeon E5-2650V3 and two DDR4 REG ECC memory modules

Atermiter

Atermiter AT-X99 Intel motherboard with Xeon E5-2650V3 and 32GB DDR4 REG ECC

SKU CH-AJJE-713YH MPN AT-X99

X99 motherboard paired with a Xeon E5-2650V3 processor and 32 GB of DDR4 REG ECC memory running at 3200 MHz

  • CPU Socket TypeLGA 2011-v3
  • CPU TypeIntel Core 5th gen (LGA 2011-v3)

Option X99-2650V3-32G 3200Mhz(16GB x 2pcs ECC)

  • Ready-to-run Xeon E5-2650V3 with 32 GB REG ECC memory
  • X99 chipset board fits LGA 2011-v3 CPUs
  • 3200 MHz DDR4 modules installed — CPU reads at 2133 MHz
  • Four DDR4 slots accept REG ECC or non-ECC UDIMM
  • Compact 235 x 185 mm form factor for small builds

Ready LGA 2011-v3 platform bundle

This bundle pairs an Atermiter AT-X99 motherboard with an Intel Xeon E5-2650V3 processor and 32 GB of DDR4 REG ECC memory. The board uses a H81 or B85 class chipset and fits the LGA 2011-v3 socket. It is a complete kit for builders who want a tested workstation base without sourcing parts separately.

Suits ECC memory workflows.

The system suits users who need registered ECC stability for rendering, virtualization or server tasks. Buyers who want to mix ECC with standard desktop UDIMM modules cannot do so on this board. Anyone requiring integrated graphics should look elsewhere because the board has none.

CPU caps memory at 2133 MHz despite 3200 MHz modules

The supplied Xeon E5-2650V3 limits the memory controller to 2133 MHz even though the kit includes 3200 MHz REG ECC DIMMs. This single specification decides whether the performance level matches the workload. The board also accepts V3 and V4 series CPUs for future upgrades.

Poudarki

  • Ready-to-run Xeon E5-2650V3 with 32 GB REG ECC memory
  • X99 chipset board fits LGA 2011-v3 CPUs
  • 3200 MHz DDR4 modules installed — CPU reads at 2133 MHz
  • Four DDR4 slots accept REG ECC or non-ECC UDIMM
  • Compact 235 x 185 mm form factor for small builds

Specifikacije

CPU Socket TypeLGA 2011-v3
CPU TypeIntel Core 5th gen (LGA 2011-v3)

Druge različice tega modela

še 3 v isti paleti

Ista družina, različen pomnilnik, hladilnik ali takt — primerjajte, preden se odločite.

Vprašanja o tem izdelku

Will the board run the included RAM at its rated 3200 MHz?

The Xeon E5-2650V3 memory controller tops out at 2133 MHz, so the 3200 MHz modules will operate at that lower speed.

Can I add standard desktop UDIMM sticks later?

The board requires all installed modules to be the same type; mixing REG ECC with non-ECC UDIMM is not supported.

What power connectors does the motherboard need?

A 24-pin ATX connector plus an 8-pin CPU power connector are required.

Tudi v tem oddelku

Stranke so primerjale tudi te

Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.