暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Atermiter AT-X99 motherboard with Xeon E5-2650V3 and two DDR4 REG ECC memory modules

Atermiter

Atermiter AT-X99 Intel motherboard with Xeon E5-2650V3 and 32GB DDR4 REG ECC

SKU CH-AJJE-713YH MPN AT-X99

X99 motherboard paired with a Xeon E5-2650V3 processor and 32 GB of DDR4 REG ECC memory running at 3200 MHz

  • CPU Socket TypeLGA 2011-v3
  • CPU TypeIntel Core 5th gen (LGA 2011-v3)

Option X99-2650V3-32G 3200Mhz(16GB x 2pcs ECC)

  • Ready-to-run Xeon E5-2650V3 with 32 GB REG ECC memory
  • X99 chipset board fits LGA 2011-v3 CPUs
  • 3200 MHz DDR4 modules installed — CPU reads at 2133 MHz
  • Four DDR4 slots accept REG ECC or non-ECC UDIMM
  • Compact 235 x 185 mm form factor for small builds

Ready LGA 2011-v3 platform bundle

This bundle pairs an Atermiter AT-X99 motherboard with an Intel Xeon E5-2650V3 processor and 32 GB of DDR4 REG ECC memory. The board uses a H81 or B85 class chipset and fits the LGA 2011-v3 socket. It is a complete kit for builders who want a tested workstation base without sourcing parts separately.

Suits ECC memory workflows.

The system suits users who need registered ECC stability for rendering, virtualization or server tasks. Buyers who want to mix ECC with standard desktop UDIMM modules cannot do so on this board. Anyone requiring integrated graphics should look elsewhere because the board has none.

CPU caps memory at 2133 MHz despite 3200 MHz modules

The supplied Xeon E5-2650V3 limits the memory controller to 2133 MHz even though the kit includes 3200 MHz REG ECC DIMMs. This single specification decides whether the performance level matches the workload. The board also accepts V3 and V4 series CPUs for future upgrades.

特長

  • Ready-to-run Xeon E5-2650V3 with 32 GB REG ECC memory
  • X99 chipset board fits LGA 2011-v3 CPUs
  • 3200 MHz DDR4 modules installed — CPU reads at 2133 MHz
  • Four DDR4 slots accept REG ECC or non-ECC UDIMM
  • Compact 235 x 185 mm form factor for small builds

仕様

CPU Socket TypeLGA 2011-v3
CPU TypeIntel Core 5th gen (LGA 2011-v3)

このモデルの他のバージョン

同シリーズにさらに 3点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

Will the board run the included RAM at its rated 3200 MHz?

The Xeon E5-2650V3 memory controller tops out at 2133 MHz, so the 3200 MHz modules will operate at that lower speed.

Can I add standard desktop UDIMM sticks later?

The board requires all installed modules to be the same type; mixing REG ECC with non-ECC UDIMM is not supported.

What power connectors does the motherboard need?

A 24-pin ATX connector plus an 8-pin CPU power connector are required.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。