Atermiter AT-X99 Intel motherboard with Xeon E5-2660 V3 and 32GB DDR4 REG ECC
- LGA 2011-v3
- Intel Core 5th gen…
Atermiter
X99 motherboard paired with an 8-core Xeon E5-2640V3 and 32 GB DDR4 REG ECC memory
Option X99-2640V3-32G 3200Mhz(16GB x 2pcs ECC)
This bundle pairs an Atermiter AT-X99 board with a Xeon E5-2640V3 and 32 GB of DDR4 REG ECC memory. The LGA 2011-v3 socket and quad-channel slots arrive populated, so builders can assemble a multi-threaded station without sourcing parts separately.
The 235 mm by 185 mm PCB fits mid-tower chassis while exposing a 24-pin plus 8-pin power arrangement and a full-length PCI-E x16 slot. Four DDR4 sockets accept REG ECC modules only; mixing with unbuffered desktop RAM is not supported by this design.
The included 16 GB sticks run at 3200 MHz, though the fitted processor caps the controller at 1866 MHz. Users moving from standard non-ECC dual-channel kits gain error correction and higher capacity headroom for virtualization or rendering workloads.
| CPU Socket Type | LGA 2011-v3 |
|---|---|
| CPU Type | Intel Core 5th gen (LGA 2011-v3) |
このモデルの他のバージョン
同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。
The CPU's memory controller tops out at 1866 MHz, so the included 3200 MHz modules will run at that lower speed.
The motherboard measures 235 by 185 mm and uses the standard LGA 2011-3 mounting pattern.
Align each connector's keyed notch with the socket, press straight down until the latch clicks, and avoid angling the plug.
同じ売り場の商品
同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。
お支払いに使うコインと、価格表示に使う通貨です。
チェックアウト時にウォレットから送信されます。
表示のみ—カタログの価格は米ドル建てです。
該当する通貨がありません。
サイトの表示言語を選択してください。
一致する言語がありません。
初めてのご利用ですか?
すでにお持ちですか?
自動的な再設定はありません。当店はメールを送信しないため、ワンタイムリンクをお送りすることもできません。アカウントにメールアドレスを残しておいていただければ、担当者が手作業で確認いたします。
リクエストを受け付けました
受信箱に何かが届くことはありません — 当店はメールを一切送信していません。担当者が手作業で確認いたします。
思い出しましたか?