Atermiter AT-X99 Intel motherboard with Xeon E5-2660 V3 and 32GB DDR4 REG ECC
- LGA 2011-v3
- Intel Core 5th gen…
Atermiter
X99 motherboard paired with an 8-core Xeon E5-2640V3 and 32 GB DDR4 REG ECC memory
Option X99-2640V3-32G 3200Mhz(16GB x 2pcs ECC)
This bundle pairs an Atermiter AT-X99 board with a Xeon E5-2640V3 and 32 GB of DDR4 REG ECC memory. The LGA 2011-v3 socket and quad-channel slots arrive populated, so builders can assemble a multi-threaded station without sourcing parts separately.
The 235 mm by 185 mm PCB fits mid-tower chassis while exposing a 24-pin plus 8-pin power arrangement and a full-length PCI-E x16 slot. Four DDR4 sockets accept REG ECC modules only; mixing with unbuffered desktop RAM is not supported by this design.
The included 16 GB sticks run at 3200 MHz, though the fitted processor caps the controller at 1866 MHz. Users moving from standard non-ECC dual-channel kits gain error correction and higher capacity headroom for virtualization or rendering workloads.
| CPU Socket Type | LGA 2011-v3 |
|---|---|
| CPU Type | Intel Core 5th gen (LGA 2011-v3) |
其他版本
同系列產品,記憶體、散熱器或時脈不同 — 下單前請先比較。
The CPU's memory controller tops out at 1866 MHz, so the included 3200 MHz modules will run at that lower speed.
The motherboard measures 235 by 185 mm and uses the standard LGA 2011-3 mounting pattern.
Align each connector's keyed notch with the socket, press straight down until the latch clicks, and avoid angling the plug.
同類商品
同一分類,同一套結帳流程 — 支援八種加密貨幣,匯率鎖定 30 分鐘。
您支付所用的幣種,以及查看價格所用的貨幣。
結帳時由您的錢包發送
僅供顯示 — 商品目錄以美元計價
查無符合的貨幣。
請選擇網站使用的語言。
查無符合的語言。
初次造訪?
已經有帳戶了嗎?
本店沒有自動重設密碼的機制:由於不寄送電子郵件,也就沒有一次性連結可供申請。只要將地址留在帳戶中,之後將由專人處理。
請求已收到
不會有任何郵件寄到您的信箱 — 本商店完全不寄送電子郵件。會有人親自處理這些申請。
想起來了嗎?