Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.

Spremljani izdelki Prijava

Computer Memory Solutions

Computer Memory Solutions CM5126412800DIMM 8GB (2x4GB) DDR3 1600 CL11 1.5V memory upgrade

SKU CH-4Z8E-3QSG1

8GB DDR3 1600 CL11 dual-channel kit, 1.5V unbuffered non-ECC, validated for ASRock 970 Pro2, B85 Pro4, B85iCafe4 and B85M Pro4 boards

  • Capacity8GB (2 x 4GB)
  • Type240-Pin DDR3 SDRAM
  • SpeedDDR3 1600 (PC3 12800)
  • CAS LatencyCL11
  • Timing11-11-11
  • Voltage1.5V
  • 8GB dual-channel kit boosts multitasking on compatible ASRock boards
  • DDR3 1600 CL11 timing delivers responsive system performance
  • 5V standard voltage ensures broad motherboard compatibility
  • 240-pin unbuffered non-ECC modules install without configuration
  • Tested for guaranteed operation with 970 Pro2, B85 Pro4, B85iCafe4, B85M Pro4

Compatible DDR3 Kit for ASRock 970 and B85 Boards

This 8 GB kit contains two 4 GB DDR3 modules built to run at 1600 MHz with CL11 timings. It is validated for ASRock 970 Pro2, B85 Pro4, B85iCafe4 and B85M Pro4 motherboards. The unbuffered non-ECC DIMMs install directly into standard 240-pin slots. Builders upgrading those specific platforms can add capacity without compatibility guesswork.

Steady Operation at 1.5 V Without Heat Spreaders

The modules operate at the standard 1.5 V DDR3 voltage and carry no heat spreaders, keeping the profile low for tight CPU cooler clearance. Under sustained workloads the chips run at their rated 11-11-11 timings without active cooling. Systems that load all four slots up to the board maximum of 32 GB will see consistent throughput because each stick uses a single 1Rx8 rank.

Low-Profile 240-Pin DIMMs for Everyday Builds

Each stick uses a standard 240-pin DDR3 edge connector and omits a heat spreader, so it fits beneath most tower coolers and in compact chassis. The two-module kit populates a pair of slots for dual-channel bandwidth on supported boards. Buyers needing ECC error correction or registered buffering for server-grade stability should look elsewhere, as this kit provides neither.

Poudarki

  • 8GB dual-channel kit boosts multitasking on compatible ASRock boards
  • DDR3 1600 CL11 timing delivers responsive system performance
  • 5V standard voltage ensures broad motherboard compatibility
  • 240-pin unbuffered non-ECC modules install without configuration
  • Tested for guaranteed operation with 970 Pro2, B85 Pro4, B85iCafe4, B85M Pro4

Specifikacije

BrandComputer Memory Solutions
ModelCM5126412800DIMM
Capacity8GB (2 x 4GB)
Type240-Pin DDR3 SDRAM
SpeedDDR3 1600 (PC3 12800)
CAS LatencyCL11
Timing11-11-11
Voltage1.5V
ECCNo
Buffered/RegisteredUnbuffered
Rank1Rx8
ChipsetMajor Brand Chipset
Heat SpreaderNo
Compatible SystemASRock 970 Pro2, B85 Pro4, B85iCafe4, B85M Pro4
Package Content2 Memory RAM Sticks

Vprašanja o tem izdelku

How much power do these 1.5 V DDR3 modules draw when the system runs all day?

Each stick operates at the standard 1.5 V DDR3 voltage, so total power draw stays within normal DDR3 limits for an 8 GB kit.

What motherboard slot type must I already have for this 240-pin kit to fit?

You need a board with four 240-pin DDR3 DIMM sockets, such as the ASRock 970 Pro2, B85 Pro4, B85iCafe4 or B85M Pro4.

Can I keep my existing DDR3 sticks and add this 2 x 4 GB kit without mixing speeds?

Yes, the CL11 1600 MHz modules will run at the speed of the slowest installed DDR3 memory, so older sticks stay compatible.

Tudi v tem oddelku

Stranke so primerjale tudi te

Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.