Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.

Spremljani izdelki Prijava
Silver 3.5 inch mechanical hard drive with green circuit board exposed on underside

DELL

DELL 300Gb 15K SAS 3.5" internal hard drive F617n

SKU CH-KMG6-1N8SP

A 3.5 inch mechanical hard disk delivering 300 Gb capacity with 15K rpm speed and a 6 Gb/s SAS interface

  • 300 Gb capacity stores critical data
  • 15 K RPM spindle speeds up access
  • 6 Gb/s SAS interface moves files fast
  • 16 MB cache smooths burst workloads
  • 5 inch form factor fits standard bays

Dell F617n 300Gb 15K SAS Drive

This Dell F617n is a 3.5 inch mechanical hard drive with a 300Gb capacity and a 15K spindle speed. It connects through a 6Gb/s Sas interface and includes a 16Mb cache buffer. The unit weighs 2.49 pounds and measures 5.4 by 3.1 by 0.6 inches.

Suits Servers Needing Fast 300Gb Storage

This drive fits servers or workstations that require a 300Gb 15K Sas disk for primary storage or array rebuilds. Buyers who need more capacity than 300Gb should look at larger drives. Systems without a Sas backplane or controller cannot use this drive.

300Gb Capacity At 15K RPM Over Sas

The single specification that decides fit is the 300Gb capacity delivered at 15K rpm over a Sas interface. Verify that your chassis accepts a 3.5 inch form factor and that your controller supports 6Gb/s Sas operation before purchase.

Poudarki

  • 300 Gb capacity stores critical data
  • 15 K RPM spindle speeds up access
  • 6 Gb/s SAS interface moves files fast
  • 16 MB cache smooths burst workloads
  • 5 inch form factor fits standard bays

Specifikacije

Za ta izdelek še ni objavljenih specifikacij.

Vprašanja o tem izdelku

Will this 3.5-inch SAS drive work in my older server that only has 3 Gb/s SAS backplanes?

The drive uses a 6 Gb/s SAS interface and will negotiate down to 3 Gb/s on older backplanes, so it will function at the slower speed.

How can I verify the 15 K rpm spindle is running correctly after installation?

Listen for the characteristic high-pitched whine of a 15 K rpm motor and check SMART data for a stable rotational speed reading.

Does the F617n come with a mounting bracket or SAS cable, or must I source them separately?

The drive is supplied as a bare 3.5-inch mechanism weighing 2.49 pounds; brackets and cables are not included.

Tudi v tem oddelku

Stranke so primerjale tudi te

Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.