Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.

Spremljani izdelki Prijava
Silver 3.5 inch SAS internal hard drive with green circuit board visible

DELL

DELL 400-AIRE 8 TB 3.5" 7200 rpm SAS internal hard drive

SKU CH-PXR3-0FH68

An 8 TB internal hard drive with a 3.5-inch form factor, 7200 rpm spindle speed and a 6Gb/s SAS interface

  • 8 TB capacity stores large datasets
  • 7200 rpm spindle speed enables quick data access
  • 6Gb/s SAS interface supports fast transfer rates
  • 5 inch form factor fits standard drive bays
  • New condition ensures full manufacturer reliability

Dell 400-AIRE 8 TB SAS Hard Drive

This new 8 TB internal hard drive from Dell spins at 7200 rpm and connects through a 6Gb/s SAS interface in a 3.5 inch form factor. It is built for desktop workstations and servers that require high-capacity, enterprise-grade storage with a dual-ported SAS connection.

Suited for SAS-equipped desktops

This drive fits systems that accept a 3.5 inch SAS device and can supply the necessary power and backplane connections. Buyers whose platforms only offer a different drive interface or a smaller form factor should look at something else.

6Gb/s SAS interface determines compatibility

The drive communicates exclusively over a 6Gb/s SAS link, so the host controller or backplane must provide a matching SAS port. Without that specific interface the drive cannot be installed or used.

Poudarki

  • 8 TB capacity stores large datasets
  • 7200 rpm spindle speed enables quick data access
  • 6Gb/s SAS interface supports fast transfer rates
  • 5 inch form factor fits standard drive bays
  • New condition ensures full manufacturer reliability

Specifikacije

Za ta izdelek še ni objavljenih specifikacij.

Vprašanja o tem izdelku

How much heat and noise does the 7200 rpm 3.5" mechanism produce during continuous operation?

The 7200 rpm spindle speed and 3.5" form factor generate typical enterprise-level heat and acoustic output for sustained workloads.

What host connector must my system provide for the 6Gb/s SAS interface to function?

A SAS backplane or HBA with a 6Gb/s SAS port and a compatible SAS cable is required for the drive to be recognised.

Will the 6Gb/s SAS interface work with older 3Gb/s SAS controllers I already own?

The drive uses a 6Gb/s SAS interface; compatibility with 3Gb/s controllers depends on the controller's own negotiation capability.

Tudi v tem oddelku

Stranke so primerjale tudi te

Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.