暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Silver 3.5 inch SAS internal hard drive with green circuit board visible

DELL

DELL 400-AIRE 8 TB 3.5" 7200 rpm SAS internal hard drive

SKU CH-PXR3-0FH68

An 8 TB internal hard drive with a 3.5-inch form factor, 7200 rpm spindle speed and a 6Gb/s SAS interface

  • 8 TB capacity stores large datasets
  • 7200 rpm spindle speed enables quick data access
  • 6Gb/s SAS interface supports fast transfer rates
  • 5 inch form factor fits standard drive bays
  • New condition ensures full manufacturer reliability

Dell 400-AIRE 8 TB SAS Hard Drive

This new 8 TB internal hard drive from Dell spins at 7200 rpm and connects through a 6Gb/s SAS interface in a 3.5 inch form factor. It is built for desktop workstations and servers that require high-capacity, enterprise-grade storage with a dual-ported SAS connection.

Suited for SAS-equipped desktops

This drive fits systems that accept a 3.5 inch SAS device and can supply the necessary power and backplane connections. Buyers whose platforms only offer a different drive interface or a smaller form factor should look at something else.

6Gb/s SAS interface determines compatibility

The drive communicates exclusively over a 6Gb/s SAS link, so the host controller or backplane must provide a matching SAS port. Without that specific interface the drive cannot be installed or used.

特長

  • 8 TB capacity stores large datasets
  • 7200 rpm spindle speed enables quick data access
  • 6Gb/s SAS interface supports fast transfer rates
  • 5 inch form factor fits standard drive bays
  • New condition ensures full manufacturer reliability

仕様

この商品の仕様はまだ公開されていません。

この商品に関する質問

How much heat and noise does the 7200 rpm 3.5" mechanism produce during continuous operation?

The 7200 rpm spindle speed and 3.5" form factor generate typical enterprise-level heat and acoustic output for sustained workloads.

What host connector must my system provide for the 6Gb/s SAS interface to function?

A SAS backplane or HBA with a 6Gb/s SAS port and a compatible SAS cable is required for the drive to be recognised.

Will the 6Gb/s SAS interface work with older 3Gb/s SAS controllers I already own?

The drive uses a 6Gb/s SAS interface; compatibility with 3Gb/s controllers depends on the controller's own negotiation capability.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。