Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.

Spremljani izdelki Prijava
Dell QME2572 dual-port mezzanine card, green PCB, metal bracket, gold edge connector

DELL

DELL W7Kt8 Qme2572 8Gb/S Dual Port PCI-Express Fiber Channel Mezzanine Host Bus Adapter

SKU CH-969K-RF4MM

Dual-port 8 Gb/s Fibre Channel mezzanine adapter for Dell M-series blade servers

  • Dual 8Gb/s Fibre Channel ports enable high-speed storage networking
  • PCI-Express mezzanine form factor fits Dell M-Series blade servers
  • Part W7Kt8 / QME2572 identifies the exact Dell adapter model
  • Unit weighs 5.1 for rack-density planning

DELL 8Gb/s Dual-Port Fibre Channel Mezzanine HBA

This DELL QME2572 mezzanine host bus adapter provides two 8Gb/s Fibre Channel ports over a PCI Express interface. It is designed for installation in DELL M Series blade servers to add dual-port SAN connectivity. The unit is supplied new and weighs 5.1 units according to the manufacturer data.

Suited for M Series blade server SAN connectivity

This adapter fits administrators expanding Fibre Channel capacity in compatible DELL M Series blade enclosures. It does not suit servers lacking the required mezzanine slot or those needing a different port count or interface standard.

Poudarki

  • Dual 8Gb/s Fibre Channel ports enable high-speed storage networking
  • PCI-Express mezzanine form factor fits Dell M-Series blade servers
  • Part W7Kt8 / QME2572 identifies the exact Dell adapter model
  • Unit weighs 5.1 for rack-density planning

Specifikacije

BrandDELL

Vprašanja o tem izdelku

How can I verify the Qme2572 8Gb/s dual-port adapter is working after installing it in an M Series blade?

The blade firmware should list the W7Kt8 mezzanine card with two active 8Gb/s Fibre Channel ports and no error LEDs on the bracket.

What comes in the box with the W7Kt8 mezzanine adapter and what must be sourced separately?

The adapter itself is supplied; Fibre Channel SFP+ transceivers and LC cables for the dual ports are not included and must be purchased separately.

Tudi v tem oddelku

Stranke so primerjale tudi te

Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.