Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Dell QME2572 dual-port mezzanine card, green PCB, metal bracket, gold edge connector

DELL

DELL W7Kt8 Qme2572 8Gb/S Dual Port PCI-Express Fiber Channel Mezzanine Host Bus Adapter

SKU CH-969K-RF4MM

Dual-port 8 Gb/s Fibre Channel mezzanine adapter for Dell M-series blade servers

  • Dual 8Gb/s Fibre Channel ports enable high-speed storage networking
  • PCI-Express mezzanine form factor fits Dell M-Series blade servers
  • Part W7Kt8 / QME2572 identifies the exact Dell adapter model
  • Unit weighs 5.1 for rack-density planning

DELL 8Gb/s Dual-Port Fibre Channel Mezzanine HBA

This DELL QME2572 mezzanine host bus adapter provides two 8Gb/s Fibre Channel ports over a PCI Express interface. It is designed for installation in DELL M Series blade servers to add dual-port SAN connectivity. The unit is supplied new and weighs 5.1 units according to the manufacturer data.

Suited for M Series blade server SAN connectivity

This adapter fits administrators expanding Fibre Channel capacity in compatible DELL M Series blade enclosures. It does not suit servers lacking the required mezzanine slot or those needing a different port count or interface standard.

Pluspunten

  • Dual 8Gb/s Fibre Channel ports enable high-speed storage networking
  • PCI-Express mezzanine form factor fits Dell M-Series blade servers
  • Part W7Kt8 / QME2572 identifies the exact Dell adapter model
  • Unit weighs 5.1 for rack-density planning

Specificaties

BrandDELL

Vragen over dit artikel

How can I verify the Qme2572 8Gb/s dual-port adapter is working after installing it in an M Series blade?

The blade firmware should list the W7Kt8 mezzanine card with two active 8Gb/s Fibre Channel ports and no error LEDs on the bracket.

What comes in the box with the W7Kt8 mezzanine adapter and what must be sourced separately?

The adapter itself is supplied; Fibre Channel SFP+ transceivers and LC cables for the dual ports are not included and must be purchased separately.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.