Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.

Spremljani izdelki Prijava
Six green riser boards with USB 3.0 cables and SATA power adapters

EN-Labs

EN-Labs 6-Pack PCIe 1x to 16x Riser Card 60cm USB 3.0 SATA Power

SKU CH-1N66-N0MH4

Six PCIe 1x-to-16x riser cards with 60 cm USB 3.0 cables, four 270 µF solid capacitors, voltage regulation, overcurrent protection, and SATA-to-6-pin power adapters

  • TypeRiser Card
  • External USB Ports6x USB Ports
  • Specifications----Board size: approx.12.8cm x 4.2cm x 1.0cm/5.03" x 1.65"
  • FeaturesVER 006C/009S PCl-E 16x to 1x Powered Riser Adapter Card ist

Type Riser Card

External USB Ports 6x USB Ports

Model PCI Express 1

  • PCI Express 1
  • 009S
  • Six riser cards expand one x1 slot into sixteen lanes for multi-GPU builds
  • Four 270uF solid capacitors with voltage regulation and overcurrent protection stabilise power delivery
  • SATA to 6-pin power adapter cable moves GPU load off the motherboard
  • 60cm USB 3.0 cable gives flexible placement and fast data transfer
  • Compact 12.8cm x 4.2cm x 1.0cm board with four mounting holes secures the x16 connector

Six-Pack PCIe 1x to 16x Riser Kit

This kit provides six powered riser cards that connect a graphics card to a motherboard PCIe 1x, 4x, 8x or 16x slot. Each board measures 12.8cm by 4.2cm by 1.0cm and carries four 270uF solid capacitors with voltage regulation and overcurrent protection. A 60cm USB 3.0 cable links each pair for flexible placement. A SATA to 6-pin power adapter is included for every riser to draw power directly from the supply.

Mining rigs and multi-GPU compute builds

These risers suit builders assembling Ethereum mining rigs or other installations that need several graphics cards spaced away from the motherboard. The four mounting holes on each 16x connector allow secure fixing to a frame or chassis. Systems that require the full bandwidth of a native PCIe 16x link or that cannot accommodate the 60cm cable length should consider alternative solutions.

60cm USB 3.0 cable length

The 60cm USB 3.0 cable determines how far each graphics card can sit from its motherboard slot and is the key measurement for planning frame layout and airflow. If the build demands a longer or shorter reach, this kit will not fit the mechanical constraints.

Poudarki

  • Six riser cards expand one x1 slot into sixteen lanes for multi-GPU builds
  • Four 270uF solid capacitors with voltage regulation and overcurrent protection stabilise power delivery
  • SATA to 6-pin power adapter cable moves GPU load off the motherboard
  • 60cm USB 3.0 cable gives flexible placement and fast data transfer
  • Compact 12.8cm x 4.2cm x 1.0cm board with four mounting holes secures the x16 connector

Specifikacije

BrandEn-Labs
Series311009V6C6PK
Model006C/009S
TypeRiser Card
External USB Ports6x USB Ports
Specifications----Board size: approx.12.8cm x 4.2cm x 1.0cm/5.03" x 1.65" x 0.39"----4x 270uF FP solid capacitors
FeaturesVER 006C/009S PCl-E 16x to 1x Powered Riser Adapter Card isthe perfect solution for setting up Ethereum mining rigs 4 High Quality Solid Capacitors for stable and safe power delivery. Multiple Voltage Regulation Components (Voltage Regulating Diode and Linear Regulator) Overcurrent Protection (Surface Mounted Fuse) to safeguard your components in the event of a short circuit. Thin and fast USB 3.0 cable available to connect PCI-E 1X and PCI-E 16X sides for more free installation and faster data transfer for graphics card. 6-pin PCI-E power to 15-pin SATA power cable for direct connec

Druge različice tega modela

še 2 v isti paleti

Ista družina, različen pomnilnik, hladilnik ali takt — primerjajte, preden se odločite.

Vprašanja o tem izdelku

How do I verify the riser card is functioning correctly once installed?

The card uses a USB 3.0 link between the 1x and 16x ends; if the GPU is detected by the OS and mining software shows stable hash rates, the connection is working as intended.

What comes in the 6-pack and what must I supply separately?

Six riser boards, six 60 cm USB 3.0 cables and six SATA-to-6-pin power adapters are included; you must provide a power supply with SATA connectors and a motherboard with a free PCIe 1x slot for each card.

Which version of the EN-Labs riser should I choose for my build?

The 311009V6C6PK series (model 006C/009S) is the only version offered in this listing; it provides four 270 uF solid capacitors, voltage regulation and overcurrent protection on every board.

Tudi v tem oddelku

Stranke so primerjale tudi te

Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.