BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 $
0.00264636BTC
Na zalogi
G.SKILL
G.SKILL F4-4000C16D-32GTZNA Trident Z Neo 32GB (2 x 16GB) DDR4 4000 CL16 desktop RAM
32 GB dual-channel DDR4 kit running at 4000 MT/s with CL16 timings and RGB heatspreaders
- Capacity32GB (2 x 16GB)
- Type288-Pin PC RAM
- SpeedDDR4 4000 (PC4 32000)
- CAS LatencyCL16
- Timing16-16-16-36
- Voltage1.40V
- DDR4 4000 speed pushes frame rates higher
- CL16 latency tightens response in heavy workloads
- Dual-channel 32 GB kit feeds multi-core Ryzen CPUs
- 40 V operation keeps thermals stable under load
- XMP 2.0 profile applies rated timings with one click
Trident Z Neo DDR4 4000 Kit
This 32 GB dual-channel kit uses two 16 GB DDR4 modules rated at 4000 MT/s with CL16 timings. It targets AMD Ryzen desktop builders who want high-frequency memory with tight latency out of the box. The kit runs at 1.40 V and includes Intel XMP 2.0 profiles for supported platforms.
Thermals Noise and Power
Black anodized aluminum heatspreaders cover each module to move heat away from the ICs during sustained loads. No moving parts are present so the kit adds zero acoustic noise to the system. Power draw scales with the 1.40 V operating voltage and the 4000 MT/s data rate under typical workloads.
Build Quality and Connectors
Each stick uses a standard 288-pin unbuffered DIMM interface with a ten-layer PCB for signal integrity. The dual-tone silver and black finish plus customizable RGB lighting match a range of build aesthetics. Mixing this kit with other memory kits is not recommended by the manufacturer.
Poudarki
- DDR4 4000 speed pushes frame rates higher
- CL16 latency tightens response in heavy workloads
- Dual-channel 32 GB kit feeds multi-core Ryzen CPUs
- 40 V operation keeps thermals stable under load
- XMP 2.0 profile applies rated timings with one click
Specifikacije
| Brand | G.SKILL |
|---|---|
| Series | Trident Z Neo Series |
| Model | F4-4000C16D-32GTZNA |
| Capacity | 32GB (2 x 16GB) |
| Type | 288-Pin PC RAM |
| Speed | DDR4 4000 (PC4 32000) |
| CAS Latency | CL16 |
| Timing | 16-16-16-36 |
| Voltage | 1.40V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Multi-channel Kit | Dual Channel Kit |
| BIOS/Performance Profile | Intel XMP 2.0 |
| Color | Black |
| Heat Spreader | Yes |
| Features | Overclock performance DDR4 memory designed for compatible AMD AM4 platforms. Sleek dual-tone aluminum heatspreader design. Customizable RGB lighting support. Intel XMP 2.0 Support. Do not mix memory kits. Memory kits are sold in matched kits that are designed to run together as a set. Mixing memory kits will result in stability issues or system failure. Memory kits will boot at the SPD speed at default BIOS settings with compatible hardware. For memory kits with XMP, enable XMP/DOCP/A-XMP in BIOS to reach the rated potential XMP overclock speed of the memory kit, subject to the use o |
| Recommend Use | Intel Z590 / Z490 |
| LED Color | RGB |
| Teža pošiljke | 0.19 kg |
| Velikost pošiljke | 160 × 137 × 15 mm |
Vprašanja o tem izdelku
How do I install the 288-pin modules and enable the XMP 2.0 profile in BIOS?
Seat both 16 GB sticks in the motherboard slots for dual-channel operation, then enter BIOS and load the XMP 2.0 profile to run at 4000 MT/s with CL16 timing at 1.40 V.
What upkeep does the aluminum heatspreader and RGB lighting need over time?
Dust the heatspreader fins occasionally with compressed air to keep airflow clear; the RGB LEDs are solid-state and require no bulb or driver replacement.
At what point does the 1.40 V limit appear during extended heavy workloads?
Sustained loads keep the modules at their rated 1.40 V; if the memory controller cannot maintain stability at that voltage the system will throttle or error before any higher voltage is reached.
Tudi v tem oddelku
Stranke so primerjale tudi te
Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.
