Micron Technology, Inc. MT4JTF12864AZ-1G4D1 1GB DDR3 1333 Desktop RAM
- 1GB
- DDR3 1333 (PC3 1060…
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
G.SKILL
32 GB dual-channel DDR4 kit running at 4000 MT/s with CL16 timings and RGB heatspreaders
This 32 GB dual-channel kit uses two 16 GB DDR4 modules rated at 4000 MT/s with CL16 timings. It targets AMD Ryzen desktop builders who want high-frequency memory with tight latency out of the box. The kit runs at 1.40 V and includes Intel XMP 2.0 profiles for supported platforms.
Black anodized aluminum heatspreaders cover each module to move heat away from the ICs during sustained loads. No moving parts are present so the kit adds zero acoustic noise to the system. Power draw scales with the 1.40 V operating voltage and the 4000 MT/s data rate under typical workloads.
Each stick uses a standard 288-pin unbuffered DIMM interface with a ten-layer PCB for signal integrity. The dual-tone silver and black finish plus customizable RGB lighting match a range of build aesthetics. Mixing this kit with other memory kits is not recommended by the manufacturer.
| Brand | G.SKILL |
|---|---|
| Series | Trident Z Neo Series |
| Model | F4-4000C16D-32GTZNA |
| Capacity | 32GB (2 x 16GB) |
| Type | 288-Pin PC RAM |
| Speed | DDR4 4000 (PC4 32000) |
| CAS Latency | CL16 |
| Timing | 16-16-16-36 |
| Voltage | 1.40V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Multi-channel Kit | Dual Channel Kit |
| BIOS/Performance Profile | Intel XMP 2.0 |
| Color | Black |
| Heat Spreader | Yes |
| Features | Overclock performance DDR4 memory designed for compatible AMD AM4 platforms. Sleek dual-tone aluminum heatspreader design. Customizable RGB lighting support. Intel XMP 2.0 Support. Do not mix memory kits. Memory kits are sold in matched kits that are designed to run together as a set. Mixing memory kits will result in stability issues or system failure. Memory kits will boot at the SPD speed at default BIOS settings with compatible hardware. For memory kits with XMP, enable XMP/DOCP/A-XMP in BIOS to reach the rated potential XMP overclock speed of the memory kit, subject to the use o |
| Recommend Use | Intel Z590 / Z490 |
| LED Color | RGB |
| Shipping weight | 0.19 kg |
| Package size | 160 × 137 × 15 mm |
Seat both 16 GB sticks in the motherboard slots for dual-channel operation, then enter BIOS and load the XMP 2.0 profile to run at 4000 MT/s with CL16 timing at 1.40 V.
Dust the heatspreader fins occasionally with compressed air to keep airflow clear; the RGB LEDs are solid-state and require no bulb or driver replacement.
Sustained loads keep the modules at their rated 1.40 V; if the memory controller cannot maintain stability at that voltage the system will throttle or error before any higher voltage is reached.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?