Thermalright MC-2 ARGB Memory Cooler White 3200 RPM
- Fan & Heatsinks
- DDR/DDR2/DDR3/DDR4/…
Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.
greenDracaena
Two nickel-plated brass 90° rotary adapters with G1/4″ BSP threads for custom water-cooling loops
This two-pack supplies nickel-plated brass 90° rotary adapters with G1/4" BSP threads for custom water-cooling loops. The male end offers a 5 mm thread length while the female end provides 6 mm, letting builders route tubing around tight corners without stress on rigid or flexible runs. Each fitting measures 1.29 in by 1.29 in by .59 in with a 17.9 mm knurled diameter and 28.9 mm installed height.
Fixed elbows lock orientation at install time, forcing tube bends to match the fitting. These rotary joints spin freely after tightening, so the outlet can be aligned precisely once the loop is pressure-tested. The jump is worth it when tubing paths cross motherboard heatsinks, GPU backplates or reservoir ports that leave no room for trial-and-error positioning. Builders using only straight fittings or non-rotary elbows gain the ability to finalise angles after the loop is filled.
Confirm every component in the loop uses G1/4" BSP threads; mismatched thread standards will leak. Measure the space around each connection point — 28.9 mm installed height plus tube bend radius must fit between components and case panels. The 17.9 mm knurled diameter needs enough room for a wrench or fingers during assembly. Nickel-plated brass resists corrosion but should not contact bare aluminium blocks without a corrosion inhibitor in the coolant.
| Brand | greenDracaena |
|---|---|
| Series | White (90 Rotary) |
| Model | D-90-Rotary |
| Part Number | D-90-Rotary-White-2-S |
| Radiator Size | 2 pcs |
| Fan Size | 2 pcs |
| Fan Dim. | 1.29 in x 1.29 in x 0.59 in |
| LED Color | White (90 Rotary) |
The knurled section measures 17.9 mm across and the fitting stands 28.9 mm tall once threaded in, so allow that diameter and height around the port.
The 5 mm male end threads into your component and the 6 mm female end accepts a standard G1/4" fitting; the step often missed is using a wrench on the knurled nut only so the rotary joint stays free to swivel.
Inspect the O-ring each time the loop is drained; replace the fitting if the plating shows corrosion or the rotary action feels gritty, otherwise the brass body is rated for the life of the loop.
Tudi v tem oddelku
Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.
V čem plačujete in v čem berete cene.
Poslano iz Vaše denarnice ob blagajni
Samo za prikaz — katalog je cenovno izražen v dolarjih
Nobena valuta ne ustreza.
Izberite jezik, v katerem Vam govori spletna stran.
Prvič tu?
Že imate račun?
Samodejne ponastavitve ni: ta trgovina ne pošilja e-pošte, zato ni enkratne povezave, ki bi jo lahko zahtevali. Pustite naslov na računu — nekdo ga bo obravnaval ročno.
Zahteva zabeležena
V Vašo elektronsko pošto ne prihaja nič — ta trgovina ne pošilja nobene e-pošte. Zahteve nekdo obravnava ročno.
Ste se spomnili?