Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.

Spremljani izdelki Prijava
Silver 3.5 inch bare SAS hard drive, model 625031-B21

HP

HP 625031-B21 3TB 7200 RPM SAS 6Gb/s 3.5" internal hard drive

SKU CH-5B92-BYE5Y MPN 625031-B21

3.5-inch SAS drive spinning at 7200 RPM with 3TB capacity for server storage

  • PackagingBare Drive
  • InterfaceSAS 6Gb/s
  • Capacity3TB
  • RPM7200 RPM
  • Average Latency6Gb/s
  • FeaturesHP 6Gb/sec SAS Enterprise and Midline hard drives deliver hi
  • 3 TB capacity stores large datasets
  • 7200 RPM spindle delivers responsive throughput
  • SAS 6 Gb/s interface ensures reliable connectivity
  • 5 inch form factor fits standard drive bays
  • Midline design suits nearline server workloads

3 TB SAS hard drive for servers

This HP 625031-B21 is a 3 TB, 7200 RPM SAS 6Gb/s 3.5-inch internal hard drive supplied as a bare drive. It is built for enterprise and midline server environments that demand high-capacity storage with consistent reliability. The SAS interface supports dual-port operation for improved data-path redundancy. It fits standard large-form-factor drive bays in compatible HP ProLiant and storage systems.

Suits high-capacity server storage not

This drive suits administrators who need large, cost-effective capacity for bulk data, backups or near-line archives in 6 Gb/s SAS infrastructures. It is not for workloads that require low-latency random I/O or sustained throughput beyond what a 7.2K rpm mechanical drive can deliver. Builders needing hot-plug trays must source the appropriate carrier separately. Desktop PCs and consumer NAS units lacking a SAS controller cannot use this drive.

SAS 6Gb/s interface dictates controller

The single specification that decides fitment is the 6 Gb/s SAS interface. The host system must provide a compatible SAS HBA, RAID controller or backplane that supports 3.5-inch LFF drives. Without a SAS connection the drive will not function, regardless of available bays or power connectors.

Poudarki

  • 3 TB capacity stores large datasets
  • 7200 RPM spindle delivers responsive throughput
  • SAS 6 Gb/s interface ensures reliable connectivity
  • 5 inch form factor fits standard drive bays
  • Midline design suits nearline server workloads

Specifikacije

BrandHP
Model625031-B21
PackagingBare Drive
InterfaceSAS 6Gb/s
Capacity3TB
RPM7200 RPM
Average Latency6Gb/s
FeaturesHP 6Gb/sec SAS Enterprise and Midline hard drives deliver high performance solutions for hosting high transaction based applications. Available in HP hot plug carriers or non-hot plug. The HP SAS Enterprise and Midline hard drives come in both 2.5-inch (SFF) and 3.5-inch (LFF) industry standard form factors and are available in a variety of capacity points to meet a wide range of requirements. The SAS interface was designed and engineered for high availability, enterprise-class data storage where performance, reliability and data integrity are crucial.
Performance and Reliability for
UsageIdeal for Servers
Form Factor3.5"
Teža pošiljke1.32 kg
Velikost pošiljke292 × 231 × 135 mm

Vprašanja o tem izdelku

Will the SAS 6Gb/s interface on the 625031-B21 work with my older 3Gb/s SAS backplane?

Yes, the 6Gb/s SAS interface is backward compatible with 3Gb/s SAS controllers and backplanes, though the drive will run at the lower 3Gb/s link speed.

How can I verify the 7200 RPM spindle speed is active after installing the drive?

Check the drive's reported rotational speed in your RAID controller BIOS, operating system disk utility, or SMART data — it should show 7200 RPM.

The listing says bare drive; does the 625031-B21 include a 3.5" mounting tray or screws?

No, this is a bare drive only — you must supply your own 3.5" carrier tray and mounting screws for your server or enclosure.

Tudi v tem oddelku

Stranke so primerjale tudi te

Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.