Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Silver 3.5 inch bare SAS hard drive, model 625031-B21

HP

HP 625031-B21 3TB 7200 RPM SAS 6Gb/s 3.5" internal hard drive

SKU CH-5B92-BYE5Y MPN 625031-B21

3.5-inch SAS drive spinning at 7200 RPM with 3TB capacity for server storage

  • PackagingBare Drive
  • InterfaceSAS 6Gb/s
  • Capacity3TB
  • RPM7200 RPM
  • Average Latency6Gb/s
  • FeaturesHP 6Gb/sec SAS Enterprise and Midline hard drives deliver hi
  • 3 TB capacity stores large datasets
  • 7200 RPM spindle delivers responsive throughput
  • SAS 6 Gb/s interface ensures reliable connectivity
  • 5 inch form factor fits standard drive bays
  • Midline design suits nearline server workloads

3 TB SAS hard drive for servers

This HP 625031-B21 is a 3 TB, 7200 RPM SAS 6Gb/s 3.5-inch internal hard drive supplied as a bare drive. It is built for enterprise and midline server environments that demand high-capacity storage with consistent reliability. The SAS interface supports dual-port operation for improved data-path redundancy. It fits standard large-form-factor drive bays in compatible HP ProLiant and storage systems.

Suits high-capacity server storage not

This drive suits administrators who need large, cost-effective capacity for bulk data, backups or near-line archives in 6 Gb/s SAS infrastructures. It is not for workloads that require low-latency random I/O or sustained throughput beyond what a 7.2K rpm mechanical drive can deliver. Builders needing hot-plug trays must source the appropriate carrier separately. Desktop PCs and consumer NAS units lacking a SAS controller cannot use this drive.

SAS 6Gb/s interface dictates controller

The single specification that decides fitment is the 6 Gb/s SAS interface. The host system must provide a compatible SAS HBA, RAID controller or backplane that supports 3.5-inch LFF drives. Without a SAS connection the drive will not function, regardless of available bays or power connectors.

Kohokohdat

  • 3 TB capacity stores large datasets
  • 7200 RPM spindle delivers responsive throughput
  • SAS 6 Gb/s interface ensures reliable connectivity
  • 5 inch form factor fits standard drive bays
  • Midline design suits nearline server workloads

Tekniset tiedot

BrandHP
Model625031-B21
PackagingBare Drive
InterfaceSAS 6Gb/s
Capacity3TB
RPM7200 RPM
Average Latency6Gb/s
FeaturesHP 6Gb/sec SAS Enterprise and Midline hard drives deliver high performance solutions for hosting high transaction based applications. Available in HP hot plug carriers or non-hot plug. The HP SAS Enterprise and Midline hard drives come in both 2.5-inch (SFF) and 3.5-inch (LFF) industry standard form factors and are available in a variety of capacity points to meet a wide range of requirements. The SAS interface was designed and engineered for high availability, enterprise-class data storage where performance, reliability and data integrity are crucial.
Performance and Reliability for
UsageIdeal for Servers
Form Factor3.5"
Lähetyspaino1.32 kg
Pakkauksen mitat292 × 231 × 135 mm

Kysymyksiä tästä tuotteesta

Will the SAS 6Gb/s interface on the 625031-B21 work with my older 3Gb/s SAS backplane?

Yes, the 6Gb/s SAS interface is backward compatible with 3Gb/s SAS controllers and backplanes, though the drive will run at the lower 3Gb/s link speed.

How can I verify the 7200 RPM spindle speed is active after installing the drive?

Check the drive's reported rotational speed in your RAID controller BIOS, operating system disk utility, or SMART data — it should show 7200 RPM.

The listing says bare drive; does the 625031-B21 include a 3.5" mounting tray or screws?

No, this is a bare drive only — you must supply your own 3.5" carrier tray and mounting screws for your server or enclosure.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.