Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.

Spremljani izdelki Prijava
Silver 2.5 inch SAS hard drive with green circuit board visible

HPE

HPE 718292-001 1.2 TB 2.5" 10000 rpm SAS internal hard drive

SKU CH-TN6N-VPAES

A 1.2 TB 2.5-inch 10000 rpm SAS internal hard drive for high-performance storage

  • InterfaceSAS 6Gb/s
  • Capacity1.2TB
  • Form Factor2.5"
  • 2 TB capacity stores large datasets
  • 10000 rpm spindle speed accelerates data access
  • SAS 6Gb/s interface enables fast transfers
  • 5 inch form factor fits dense server bays
  • Hot-pluggable design allows drive swaps without downtime

HPE 1.2 TB SAS drive for enterprise arrays

This HPE 718292-001 drive delivers 1.2 TB of storage in a 2.5 inch form factor. It spins at 10000 rpm and connects through a SAS 6Gb/s interface. The unit is hot-pluggable and built for internal server or storage array deployment.

Verify SAS backplane and bay compatibility

Confirm that your chassis provides 2.5 inch drive bays with SAS backplane connectors. The system must support 6Gb/s SAS signalling and hot-plug capability for this drive. Ensure the controller or expander recognises the 1.20 TB capacity without firmware limitations.

Sustained throughput at 10000 rpm spindle speed

The 10000 rpm spindle maintains consistent data rates during extended read or write workloads. Mechanical latency remains stable compared with lower-speed drives under continuous I/O. The SAS 6Gb/s link sustains command queuing without the burst-only behaviour seen on slower interfaces.

Poudarki

  • 2 TB capacity stores large datasets
  • 10000 rpm spindle speed accelerates data access
  • SAS 6Gb/s interface enables fast transfers
  • 5 inch form factor fits dense server bays
  • Hot-pluggable design allows drive swaps without downtime

Specifikacije

BrandHPE
InterfaceSAS 6Gb/s
Capacity1.2TB
Form Factor2.5"

Vprašanja o tem izdelku

Does the HPE 718292-001 ship with a mounting bracket or caddy, or must I supply my own?

The drive is supplied as a bare 2.5-inch unit; any carrier or bracket required by your server or enclosure must be purchased separately.

How do I decide between the 1.2 TB capacity and other sizes in the same 10000 rpm SAS line?

Choose 1.2 TB when you need the largest available capacity at 10000 rpm in a 2.5-inch SAS form factor; smaller capacities cost less but store proportionally less data.

What does the 6Gb/s SAS interface actually deliver once the drive is installed in a compatible backplane?

The interface supports up to 6 Gbit/s link speed, while the 10000 rpm spindle provides sustained throughput suited to transactional workloads and database logs.

Tudi v tem oddelku

Stranke so primerjale tudi te

Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.