暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Silver 2.5 inch SAS hard drive with green circuit board visible

HPE

HPE 718292-001 1.2 TB 2.5" 10000 rpm SAS internal hard drive

SKU CH-TN6N-VPAES

A 1.2 TB 2.5-inch 10000 rpm SAS internal hard drive for high-performance storage

  • InterfaceSAS 6Gb/s
  • Capacity1.2TB
  • Form Factor2.5"
  • 2 TB capacity stores large datasets
  • 10000 rpm spindle speed accelerates data access
  • SAS 6Gb/s interface enables fast transfers
  • 5 inch form factor fits dense server bays
  • Hot-pluggable design allows drive swaps without downtime

HPE 1.2 TB SAS drive for enterprise arrays

This HPE 718292-001 drive delivers 1.2 TB of storage in a 2.5 inch form factor. It spins at 10000 rpm and connects through a SAS 6Gb/s interface. The unit is hot-pluggable and built for internal server or storage array deployment.

Verify SAS backplane and bay compatibility

Confirm that your chassis provides 2.5 inch drive bays with SAS backplane connectors. The system must support 6Gb/s SAS signalling and hot-plug capability for this drive. Ensure the controller or expander recognises the 1.20 TB capacity without firmware limitations.

Sustained throughput at 10000 rpm spindle speed

The 10000 rpm spindle maintains consistent data rates during extended read or write workloads. Mechanical latency remains stable compared with lower-speed drives under continuous I/O. The SAS 6Gb/s link sustains command queuing without the burst-only behaviour seen on slower interfaces.

特長

  • 2 TB capacity stores large datasets
  • 10000 rpm spindle speed accelerates data access
  • SAS 6Gb/s interface enables fast transfers
  • 5 inch form factor fits dense server bays
  • Hot-pluggable design allows drive swaps without downtime

仕様

BrandHPE
InterfaceSAS 6Gb/s
Capacity1.2TB
Form Factor2.5"

この商品に関する質問

Does the HPE 718292-001 ship with a mounting bracket or caddy, or must I supply my own?

The drive is supplied as a bare 2.5-inch unit; any carrier or bracket required by your server or enclosure must be purchased separately.

How do I decide between the 1.2 TB capacity and other sizes in the same 10000 rpm SAS line?

Choose 1.2 TB when you need the largest available capacity at 10000 rpm in a 2.5-inch SAS form factor; smaller capacities cost less but store proportionally less data.

What does the 6Gb/s SAS interface actually deliver once the drive is installed in a compatible backplane?

The interface supports up to 6 Gbit/s link speed, while the 10000 rpm spindle provides sustained throughput suited to transactional workloads and database logs.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。