Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.

Spremljani izdelki Prijava
Silver 3.5 inch hard drive with green circuit board visible on underside

HPE

HPE P53559B21 10TB 3.5" SATA 6.0Gb/s 7200 RPM internal hard drive

SKU CH-HXB1-VRZSB MPN P53559B21

A 10 TB 3.5-inch SATA 6.0 Gb/s hard drive spinning at 7200 RPM, built for 24x7 enterprise workloads with digitally signed firmware and Instant Secure Erase

  • InterfaceSATA 6.0Gb/s
  • Capacity10TB
  • RPM7200 RPM
  • 10 TB capacity for large-scale storage needs
  • 7200 RPM spindle speed for responsive data access
  • SATA 6.0 Gb/s interface for broad system compatibility
  • 5 inch form factor fits standard desktop drive bays
  • Digitally signed firmware helps protect data integrity

Enterprise-grade 10 TB SATA storage

This HPE 10 TB 3.5-inch internal hard drive uses a SATA 6.0Gb/s interface and spins at 7200 RPM. It is built for 24x7 operation in HPE server and storage platforms where high capacity and data integrity are required. The drive carries digitally signed firmware and Instant Secure Erase technology to protect data at rest and during decommissioning.

Sustained workload behaviour

Validated for continuous data-centre duty cycles, the drive maintains consistent throughput under heavy, prolonged I/O rather than only in short bursts. On-going quality monitoring throughout the product lifecycle helps ensure reliability stays stable during extended write and read sequences typical of bulk storage, cloud and web-serving workloads.

Installation and common issues

The drive fits standard 3.5-inch bays using the common HPE carrier design that is shared across supported HPE servers and arrays, so mechanical alignment is straightforward. Compatibility is limited to HPE platforms that list this part number; attempting to use it in non-HPE chassis or without the correct carrier will prevent proper mounting and firmware validation.

Poudarki

  • 10 TB capacity for large-scale storage needs
  • 7200 RPM spindle speed for responsive data access
  • SATA 6.0 Gb/s interface for broad system compatibility
  • 5 inch form factor fits standard desktop drive bays
  • Digitally signed firmware helps protect data integrity

Specifikacije

BrandHPE
InterfaceSATA 6.0Gb/s
Capacity10TB
RPM7200 RPM
Teža pošiljke2.27 kg
Velikost pošiljke282 × 224 × 147 mm

Vprašanja o tem izdelku

How much heat and noise does the 7200 RPM mechanism produce in 24x7 operation?

The drive is engineered for continuous 24x7 data centre workloads with enterprise-class reliability and on-going quality monitoring.

Does the SATA 6.0Gb/s interface require a specific HPE carrier or tray to install in my server?

Common HPE HDD carriers provide consistency and compatibility across HPE server and storage platforms for this drive.

Will the Digitally Signed Firmware and Instant Secure Erase features function on a non-HPE controller?

The drive is validated and tested for HPE server and storage platforms; firmware security and ISE are designed for that ecosystem.

Tudi v tem oddelku

Stranke so primerjale tudi te

Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.