אנחנו מקבלים תשלום בקריפטו — כך שמטבעות הקריפטו שברשותך יכולים לקנות ציוד אמיתי.שלם בקריפטו, קנה איתו ציוד אמיתי. משלוח חינם ומבוטח לכל העולם מעל 399 $. קרטונים ניטרליים וללא מיתוג, נשלחים מגרמניה.משלוח חינם ומבוטח מעל 399 $. השער שלך ננעל ל-30 דקות מרגע פתיחת הקופה.שער נעול ל-30 דקות. כל פריט אטום, המספר הסידורי שלו נבדק, והוא מכוסה באחריות ל-24 חודשים.אטום, באחריות ל-24 חודשים.

רשימת ניטור התחבר
Silver 3.5 inch hard drive with green circuit board visible on underside

HPE

HPE P53559B21 10TB 3.5" SATA 6.0Gb/s 7200 RPM internal hard drive

SKU CH-HXB1-VRZSB MPN P53559B21

A 10 TB 3.5-inch SATA 6.0 Gb/s hard drive spinning at 7200 RPM, built for 24x7 enterprise workloads with digitally signed firmware and Instant Secure Erase

  • InterfaceSATA 6.0Gb/s
  • Capacity10TB
  • RPM7200 RPM
  • 10 TB capacity for large-scale storage needs
  • 7200 RPM spindle speed for responsive data access
  • SATA 6.0 Gb/s interface for broad system compatibility
  • 5 inch form factor fits standard desktop drive bays
  • Digitally signed firmware helps protect data integrity

Enterprise-grade 10 TB SATA storage

This HPE 10 TB 3.5-inch internal hard drive uses a SATA 6.0Gb/s interface and spins at 7200 RPM. It is built for 24x7 operation in HPE server and storage platforms where high capacity and data integrity are required. The drive carries digitally signed firmware and Instant Secure Erase technology to protect data at rest and during decommissioning.

Sustained workload behaviour

Validated for continuous data-centre duty cycles, the drive maintains consistent throughput under heavy, prolonged I/O rather than only in short bursts. On-going quality monitoring throughout the product lifecycle helps ensure reliability stays stable during extended write and read sequences typical of bulk storage, cloud and web-serving workloads.

Installation and common issues

The drive fits standard 3.5-inch bays using the common HPE carrier design that is shared across supported HPE servers and arrays, so mechanical alignment is straightforward. Compatibility is limited to HPE platforms that list this part number; attempting to use it in non-HPE chassis or without the correct carrier will prevent proper mounting and firmware validation.

נקודות עיקריות

  • 10 TB capacity for large-scale storage needs
  • 7200 RPM spindle speed for responsive data access
  • SATA 6.0 Gb/s interface for broad system compatibility
  • 5 inch form factor fits standard desktop drive bays
  • Digitally signed firmware helps protect data integrity

מפרט טכני

BrandHPE
InterfaceSATA 6.0Gb/s
Capacity10TB
RPM7200 RPM
משקל משלוח2.27 kg
מידות האריזה282 × 224 × 147 mm

שאלות על הפריט הזה

How much heat and noise does the 7200 RPM mechanism produce in 24x7 operation?

The drive is engineered for continuous 24x7 data centre workloads with enterprise-class reliability and on-going quality monitoring.

Does the SATA 6.0Gb/s interface require a specific HPE carrier or tray to install in my server?

Common HPE HDD carriers provide consistency and compatibility across HPE server and storage platforms for this drive.

Will the Digitally Signed Firmware and Instant Secure Erase features function on a non-HPE controller?

The drive is validated and tested for HPE server and storage platforms; firmware security and ISE are designed for that ecosystem.

גם במדף הזה

לקוחות השוו בין אלה

אותו מדף, אותה קופה — שמונה מטבעות קריפטו ונעילת שער ל-30 דקות.