Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.

Spremljani izdelki Prijava
Rectangular silver ATX power supply unit with fan grille and rear power socket

KHACHIMO

KHACHIMO 675W ATX Power Supply YM-2751A CP-1103R2

SKU CH-XBT6-X0V8H

ATX power supply delivering 675 W with 80 PLUS Gold efficiency, zero-RPM fan mode and LLC resonant DC-to-DC topology for silent, stable operation

  • TypeATX
  • Modern Standby support enables extremely fast wake-from-sleep and better low-load efficiency
  • 80 PLUS Gold certification delivers high efficiency for lower consumption, less noise and cooler temperatures
  • Zero RPM fan mode stops the cooling fan at low and medium loads for near-silent operation
  • Resonant LLC topology with DC-to-DC conversion provides clean power, reduces coil whine and enables efficient sleep states
  • 675W ATX output compatible with NetApp FAS2040 and FAST2020 systems

Targeted Compatibility

This 675 W ATX power supply is built specifically for NetApp FAS2040 and FAST2020 storage systems. It serves administrators who need a direct replacement unit that matches the original YM-2751A and CP-1103R2 part numbers.

Not a General-Purpose Unit

Builders assembling standard desktop PCs or servers should look elsewhere because the connector layout and form factor are tailored to the listed NetApp appliances. Buyers who need modular cables, a different output distribution, or a retail ATX footprint will not be able to use this unit.

675 Watt Output

The single deciding specification is the 675 W rated capacity, which must match the power budget of the FAS2040 or FAST2020 chassis. If the target system requires a different wattage, this supply will not meet the requirement.

Poudarki

  • Modern Standby support enables extremely fast wake-from-sleep and better low-load efficiency
  • 80 PLUS Gold certification delivers high efficiency for lower consumption, less noise and cooler temperatures
  • Zero RPM fan mode stops the cooling fan at low and medium loads for near-silent operation
  • Resonant LLC topology with DC-to-DC conversion provides clean power, reduces coil whine and enables efficient sleep states
  • 675W ATX output compatible with NetApp FAS2040 and FAST2020 systems

Specifikacije

TypeATX

Vprašanja o tem izdelku

How can I verify the 675W PSU is working correctly after installation?

Confirm the system powers on, runs stress tests without shutdowns, and the fan remains off at idle thanks to Zero RPM mode while the 80 PLUS Gold efficiency keeps temperatures low.

What comes with the YM-2751A and what must be sourced separately?

The unit includes the 675W ATX power supply with CP-1103R2 labeling; standard AC power cord and mounting screws are typically required but not included.

Which capacity matches a NetApp FAS2040 or FAST2020 replacement?

Choose the 675W version (YM-2751A / CP-1103R2) as it is the specified wattage for those NetApp models.

Tudi v tem oddelku

Stranke so primerjale tudi te

Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.