Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.

Spremljani izdelki Prijava
KHACHIMO LFA50F-24-SN 24V 2.1A 50W ATX power supply unit

KHACHIMO

KHACHIMO LFA50F-24-SN 24V 2.1A 50W power supply

SKU CH-01CH-T967H

Delivers 24 V at 2.1 A for 50 W output in an ATX switching supply tested working

  • TypeATX
  • Delivers 24 V DC for stable equipment operation
  • 50 W rated output handles moderate loads
  • 1 A current capacity supports connected devices
  • Tested working to confirm reliable performance

24V 50W ATX switching supply

This KHACHIMO unit delivers 24 volts at 2.1 amps for a total of 50 watts in an ATX form factor. It is supplied new and has been tested to confirm operation. The supply suits builders who need a single 24V rail for industrial boards, test benches or embedded projects.

Thermals noise and power draw

As a 50W switching design it runs cool enough for passive or low-airflow chassis when the load stays well below the rated maximum. Under typical continuous loads the fan remains quiet and the unit draws only the AC power needed for the connected 24V equipment. Builders who require multiple output rails or higher total wattage should choose a different supply.

Poudarki

  • Delivers 24 V DC for stable equipment operation
  • 50 W rated output handles moderate loads
  • 1 A current capacity supports connected devices
  • Tested working to confirm reliable performance

Specifikacije

TypeATX

Vprašanja o tem izdelku

How is the LFA50F-24-SN installed in an ATX case, and what step do builders often miss?

Mount the unit using the standard ATX screw holes, connect the 24 V output leads to your load, then link the AC input to mains; the step often missed is verifying the 2.1 A current limit matches the device before powering on.

What maintenance or replacement will the LFA50F-24-SN need over time?

The 50 W switching supply has no user-serviceable parts; plan to replace the entire unit if output voltage drifts from 24 V or if the internal fan (if fitted) becomes noisy after extended operation.

Tudi v tem oddelku

Stranke so primerjale tudi te

Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.