Nous acceptons la cryptomonnaie — les cryptos que vous détenez peuvent ainsi acheter du matériel réel.Payez en crypto, dépensez-la en matériel réel. Livraison assurée offerte partout dans le monde au-delà de 399 $. Cartons neutres, sans marque, expédiés depuis l’Allemagne.Livraison assurée offerte au-delà de 399 $. Votre taux est bloqué pendant 30 minutes dès l’ouverture de la caisse.Taux bloqué 30 minutes. Chaque article est scellé, son numéro de série est vérifié, et il est couvert par une garantie de 24 mois.Scellé, garanti 24 mois.

Articles suivis Se connecter
KHACHIMO LFA50F-24-SN 24V 2.1A 50W ATX power supply unit

KHACHIMO

KHACHIMO LFA50F-24-SN 24V 2.1A 50W power supply

SKU CH-01CH-T967H

Delivers 24 V at 2.1 A for 50 W output in an ATX switching supply tested working

  • TypeATX
  • Delivers 24 V DC for stable equipment operation
  • 50 W rated output handles moderate loads
  • 1 A current capacity supports connected devices
  • Tested working to confirm reliable performance

24V 50W ATX switching supply

This KHACHIMO unit delivers 24 volts at 2.1 amps for a total of 50 watts in an ATX form factor. It is supplied new and has been tested to confirm operation. The supply suits builders who need a single 24V rail for industrial boards, test benches or embedded projects.

Thermals noise and power draw

As a 50W switching design it runs cool enough for passive or low-airflow chassis when the load stays well below the rated maximum. Under typical continuous loads the fan remains quiet and the unit draws only the AC power needed for the connected 24V equipment. Builders who require multiple output rails or higher total wattage should choose a different supply.

Points forts

  • Delivers 24 V DC for stable equipment operation
  • 50 W rated output handles moderate loads
  • 1 A current capacity supports connected devices
  • Tested working to confirm reliable performance

Caractéristiques

TypeATX

Questions sur cet article

How is the LFA50F-24-SN installed in an ATX case, and what step do builders often miss?

Mount the unit using the standard ATX screw holes, connect the 24 V output leads to your load, then link the AC input to mains; the step often missed is verifying the 2.1 A current limit matches the device before powering on.

What maintenance or replacement will the LFA50F-24-SN need over time?

The 50 W switching supply has no user-serviceable parts; plan to replace the entire unit if output voltage drifts from 24 V or if the internal fan (if fitted) becomes noisy after extended operation.

Également dans ce rayon

Les clients ont aussi comparé

Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.