Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.

Spremljani izdelki Prijava
Rectangular metal ATX power supply unit with ventilation grille and label showing 24V 4.5A 100W

KHACHIMO

KHACHIMO P100-24 Switching Power Supply 24V 4.5A 100W

SKU CH-8RN4-YJD2B

Delivers 24 V at 4.5 A for 100 W of regulated ATX power

  • TypeATX
  • Delivers stable 24 V output for reliable equipment operation
  • 100 W capacity handles demanding industrial loads
  • 5 A current rating supports consistent performance
  • Verified working condition ensures immediate deployment

24V 100W ATX switching supply

This unit is a 24 volt ATX switching power supply rated at 100 watts with a 4.5 amp output. It is sold new and has been tested working by the supplier. The design suits builders or technicians who need a dedicated 24 volt rail in an ATX form factor for bench testing, industrial rigs or custom projects.

100 watt capacity and 4.5 amp limit

The supply delivers up to 100 watts on the 24 volt rail, which is sufficient for moderate loads such as LED arrays, small motors or control boards. It runs out when the connected equipment draws more than 4.5 amps or requires multiple voltage rails, so it is not suited for full PC builds or high-current applications.

Poudarki

  • Delivers stable 24 V output for reliable equipment operation
  • 100 W capacity handles demanding industrial loads
  • 5 A current rating supports consistent performance
  • Verified working condition ensures immediate deployment

Specifikacije

TypeATX

Vprašanja o tem izdelku

Will the 24 V 4.5 A output run my legacy equipment that expects a 24 V rail?

Yes, the unit delivers a steady 24 V at up to 4.5 A, matching the voltage and current your older 24 V gear requires.

How can I verify the 100 W supply is operating correctly after installation?

Measure the output with a multimeter; you should read 24 V under load, and the supply should maintain that voltage without shutting down when drawing up to 4.5 A.

Tudi v tem oddelku

Stranke so primerjale tudi te

Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.