Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Rectangular metal ATX power supply unit with ventilation grille and label showing 24V 4.5A 100W

KHACHIMO

KHACHIMO P100-24 Switching Power Supply 24V 4.5A 100W

SKU CH-8RN4-YJD2B

Delivers 24 V at 4.5 A for 100 W of regulated ATX power

  • TypeATX
  • Delivers stable 24 V output for reliable equipment operation
  • 100 W capacity handles demanding industrial loads
  • 5 A current rating supports consistent performance
  • Verified working condition ensures immediate deployment

24V 100W ATX switching supply

This unit is a 24 volt ATX switching power supply rated at 100 watts with a 4.5 amp output. It is sold new and has been tested working by the supplier. The design suits builders or technicians who need a dedicated 24 volt rail in an ATX form factor for bench testing, industrial rigs or custom projects.

100 watt capacity and 4.5 amp limit

The supply delivers up to 100 watts on the 24 volt rail, which is sufficient for moderate loads such as LED arrays, small motors or control boards. It runs out when the connected equipment draws more than 4.5 amps or requires multiple voltage rails, so it is not suited for full PC builds or high-current applications.

Pluspunten

  • Delivers stable 24 V output for reliable equipment operation
  • 100 W capacity handles demanding industrial loads
  • 5 A current rating supports consistent performance
  • Verified working condition ensures immediate deployment

Specificaties

TypeATX

Vragen over dit artikel

Will the 24 V 4.5 A output run my legacy equipment that expects a 24 V rail?

Yes, the unit delivers a steady 24 V at up to 4.5 A, matching the voltage and current your older 24 V gear requires.

How can I verify the 100 W supply is operating correctly after installation?

Measure the output with a multimeter; you should read 24 V under load, and the supply should maintain that voltage without shutting down when drawing up to 4.5 A.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.