Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.

Spremljani izdelki Prijava
Rectangular black ATX power supply unit with label showing 56V 0.17A 80W

KHACHIMO

KHACHIMO POE80U-560(G)-C-R 56V 0.17A 80W power supply

SKU CH-APC3-T1WX5

An 80 W ATX power supply delivering 56 V at 0.17 A for Cisco switches

  • TypeATX
  • 56 V output powers compatible Cisco PoE switches
  • 80 W capacity delivers reliable energy for network gear
  • 17 A current rating matches original equipment specs
  • Tested working to confirm correct operation before use

Cisco 56V 80W ATX power supply

This ATX power supply delivers 56 volts at 0.17 amps for a total of 80 watts. It is built to power Cisco networking equipment that requires a 56V DC input. The unit is supplied new and has been tested for correct operation. It suits administrators replacing a failed POE80U-560(G)-C-R module in compatible switches.

Thermals noise and power draw

The 80 watt output defines the maximum heat the supply must dissipate under load. Fan speed and acoustic output will vary with the host chassis airflow design rather than the supply alone. Power drawn from the mains will be slightly above 80 watts to cover conversion losses. No independent noise or efficiency figures are provided for this model.

Poudarki

  • 56 V output powers compatible Cisco PoE switches
  • 80 W capacity delivers reliable energy for network gear
  • 17 A current rating matches original equipment specs
  • Tested working to confirm correct operation before use

Specifikacije

TypeATX

Vprašanja o tem izdelku

How do I install this 80 W power supply into a Cisco PoE switch without damaging the 56 V connector?

Slide the unit firmly into the switch bay until the latch clicks, then tighten the captive screws; the step most people skip is seating the connector fully before screwing it down, which prevents bent pins on the 56 V rail.

What maintenance will the POE80U-560(G)-C-R need after extended 0.17 A operation?

Clean the intake vents every six months with compressed air to stop dust buildup; the internal fan bearings are rated for continuous duty, so no scheduled replacement is required unless noise or vibration appears.

Tudi v tem oddelku

Stranke so primerjale tudi te

Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.