Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.

Spremljani izdelki Prijava
Rectangular silver metal server power supply unit with front panel display and controls

Matrix

Matrix MPS-3600S-100-36 server power supply 3600W 100V 36A

SKU CH-5GA4-BKRNY

Adjustable DC power supply delivering up to 3600W at 0-100V and 0-36A with 0.1% accuracy, RS-485/RS-232 MODBUS control, and full protection suite

  • Single/RedundantMATRIX High-Power Lab Power Supply 3600W, 100V 36A
  • Input Frequency Rangenot_applicable
  • +12V RailsMATRIX High-Power Lab Power Supply 3600W, 100V 36A
  • PFCMATRIX High-Power Lab Power Supply 3600W, 100V 36A
  • Dimensions14 in x 20 in x 10 in
  • Weight27.6 pounds
  • 3600 W adjustable output covers 0‑100 V and 0‑36 A for demanding lab loads
  • 1 % accuracy with 5‑digit three‑decimal display ensures precise voltage and current setting
  • RS‑485 and RS‑232 interfaces using MODBUS RTU enable remote PC or PLC control
  • Front‑panel preset buttons store voltage and current values for quick recall
  • OVP, OCP, OTP and short‑circuit protection plus key‑lock safeguard equipment and prevent accidental changes

Lab bench 3600 W supply

The Matrix MPS-3600S-100-36 is a programmable DC power supply rated for 0-100 V and 0-36 A at up to 3600 W. It accepts 198-242 Vac at 50 Hz and provides a 5-digit display with three decimal places. PWM modulation and high-gain amplification deliver stable output for laboratory and test bench use.

Engineers needing remote control

RS-485 and RS-232 interfaces with Modbus RTU protocol allow computer or PLC control, while front-panel preset buttons store voltage and current values. Over-voltage, over-current, over-temperature and short-circuit protections plus a key-lock function protect the unit and the device under test. Buyers who need multi-channel operation or AC output capability should look elsewhere.

3600 W at 100 V 36 A

The single rating of 3600 W at 100 V and 36 A determines whether this supply can power the intended load. Input voltage range, communication interfaces and protection features are secondary to that core specification.

Poudarki

  • 3600 W adjustable output covers 0‑100 V and 0‑36 A for demanding lab loads
  • 1 % accuracy with 5‑digit three‑decimal display ensures precise voltage and current setting
  • RS‑485 and RS‑232 interfaces using MODBUS RTU enable remote PC or PLC control
  • Front‑panel preset buttons store voltage and current values for quick recall
  • OVP, OCP, OTP and short‑circuit protection plus key‑lock safeguard equipment and prevent accidental changes

Specifikacije

BrandMATRIX
Series100V 36A, MPS-3600S-100-36
Model100V 36A
Part NumberMPS-3600S-100-36
Single/RedundantMATRIX High-Power Lab Power Supply 3600W, 100V 36A
Input Frequency Rangenot_applicable
+12V RailsMATRIX High-Power Lab Power Supply 3600W, 100V 36A
PFCMATRIX High-Power Lab Power Supply 3600W, 100V 36A
Dimensions14 in x 20 in x 10 in
Weight27.6 pounds
Package ContentsMATRIX High-Power Lab Power Supply 3600W, 100V 36A x 1

Vprašanja o tem izdelku

How much heat and fan noise does the MPS-3600S-100-36 produce when running at 3600 W continuously?

The unit uses an intelligent temperature-control fan that spins faster only as internal heat rises, so noise stays low at partial load and increases only when the 3600 W output demands maximum cooling.

What mains supply must already be in place for the MPS-3600S-100-36 to operate?

A single-phase 198 Vac to 242 Vac circuit at 50 Hz capable of delivering the input current required for 3600 W output is needed before the supply can be switched on.

Can the MPS-3600S-100-36 be controlled from an older PLC that only speaks MODBUS RTU over RS-485?

Yes, the built-in RS-485 port runs MODBUS RTU, so legacy PLCs or PCs with a serial adapter can set voltage, current and protection limits remotely.

Tudi v tem oddelku

Stranke so primerjale tudi te

Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.