SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
391,99 $US
0.005016BTC
En stock
Matrix
Matrix MPS-3600S-100-36 server power supply 3600W 100V 36A
Adjustable DC power supply delivering up to 3600W at 0-100V and 0-36A with 0.1% accuracy, RS-485/RS-232 MODBUS control, and full protection suite
- Single/RedundantMATRIX High-Power Lab Power Supply 3600W, 100V 36A
- Input Frequency Rangenot_applicable
- +12V RailsMATRIX High-Power Lab Power Supply 3600W, 100V 36A
- PFCMATRIX High-Power Lab Power Supply 3600W, 100V 36A
- Dimensions14 in x 20 in x 10 in
- Weight27.6 pounds
- 3600 W adjustable output covers 0‑100 V and 0‑36 A for demanding lab loads
- 1 % accuracy with 5‑digit three‑decimal display ensures precise voltage and current setting
- RS‑485 and RS‑232 interfaces using MODBUS RTU enable remote PC or PLC control
- Front‑panel preset buttons store voltage and current values for quick recall
- OVP, OCP, OTP and short‑circuit protection plus key‑lock safeguard equipment and prevent accidental changes
Lab bench 3600 W supply
The Matrix MPS-3600S-100-36 is a programmable DC power supply rated for 0-100 V and 0-36 A at up to 3600 W. It accepts 198-242 Vac at 50 Hz and provides a 5-digit display with three decimal places. PWM modulation and high-gain amplification deliver stable output for laboratory and test bench use.
Engineers needing remote control
RS-485 and RS-232 interfaces with Modbus RTU protocol allow computer or PLC control, while front-panel preset buttons store voltage and current values. Over-voltage, over-current, over-temperature and short-circuit protections plus a key-lock function protect the unit and the device under test. Buyers who need multi-channel operation or AC output capability should look elsewhere.
3600 W at 100 V 36 A
The single rating of 3600 W at 100 V and 36 A determines whether this supply can power the intended load. Input voltage range, communication interfaces and protection features are secondary to that core specification.
Points forts
- 3600 W adjustable output covers 0‑100 V and 0‑36 A for demanding lab loads
- 1 % accuracy with 5‑digit three‑decimal display ensures precise voltage and current setting
- RS‑485 and RS‑232 interfaces using MODBUS RTU enable remote PC or PLC control
- Front‑panel preset buttons store voltage and current values for quick recall
- OVP, OCP, OTP and short‑circuit protection plus key‑lock safeguard equipment and prevent accidental changes
Caractéristiques
| Brand | MATRIX |
|---|---|
| Series | 100V 36A, MPS-3600S-100-36 |
| Model | 100V 36A |
| Part Number | MPS-3600S-100-36 |
| Single/Redundant | MATRIX High-Power Lab Power Supply 3600W, 100V 36A |
| Input Frequency Range | not_applicable |
| +12V Rails | MATRIX High-Power Lab Power Supply 3600W, 100V 36A |
| PFC | MATRIX High-Power Lab Power Supply 3600W, 100V 36A |
| Dimensions | 14 in x 20 in x 10 in |
| Weight | 27.6 pounds |
| Package Contents | MATRIX High-Power Lab Power Supply 3600W, 100V 36A x 1 |
Questions sur cet article
How much heat and fan noise does the MPS-3600S-100-36 produce when running at 3600 W continuously?
The unit uses an intelligent temperature-control fan that spins faster only as internal heat rises, so noise stays low at partial load and increases only when the 3600 W output demands maximum cooling.
What mains supply must already be in place for the MPS-3600S-100-36 to operate?
A single-phase 198 Vac to 242 Vac circuit at 50 Hz capable of delivering the input current required for 3600 W output is needed before the supply can be switched on.
Can the MPS-3600S-100-36 be controlled from an older PLC that only speaks MODBUS RTU over RS-485?
Yes, the built-in RS-485 port runs MODBUS RTU, so legacy PLCs or PCs with a serial adapter can set voltage, current and protection limits remotely.
Également dans ce rayon
Les clients ont aussi comparé
Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.
SAMSUNG
SAMSUNG M393A1K43DB2-CWE DDR4-3200 8GB ECC Registered server RAM
74,99 $US
0.00095959BTC
En stock