Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.

Spremljani izdelki Prijava
Compact 24-pin ATX power module, fanless with solid polymer capacitors

Mini-Box

Mini-Box PicoPSU-150-XT 12V 150W ATX power supply

SKU CH-MYTS-PW3TM

A 150W ATX power supply that clips into the motherboard 24-pin socket, runs fanless at over 96% efficiency and uses solid polymer capacitors from Japan

  • TypeAT
  • 24-pin DC-DC ATX clips straight into the motherboard socket
  • Over 96 % efficiency with 100 % fanless operation
  • Solid polymer capacitors sourced from Japan for long life
  • 12 V input delivers 150 W continuous output
  • AT form factor fits compact builds without extra cables

PicoPSU-150-XT 12V 150W ATX power supply

This new DC-DC ATX unit clips directly into the motherboard 24-pin socket, eliminating the bulk of a standard PSU. Solid polymer capacitors from Japan and over 96% efficiency support long-term reliability in a completely fanless design.

Builders needing a tiny silent ATX supply

It suits compact systems that run on a 12V external brick and have modest power requirements. Builds requiring more than 150W, multiple high-current 12V rails, or an integrated AC inlet should consider a different form factor.

150W ceiling defines comfortable loads

The supply powers modern low-TDP processors, integrated graphics, storage drives and essential peripherals within its 150W envelope. Exceeding this limit risks instability, so total system draw must stay below the rated maximum.

Poudarki

  • 24-pin DC-DC ATX clips straight into the motherboard socket
  • Over 96 % efficiency with 100 % fanless operation
  • Solid polymer capacitors sourced from Japan for long life
  • 12 V input delivers 150 W continuous output
  • AT form factor fits compact builds without extra cables

Specifikacije

TypeAT

Vprašanja o tem izdelku

What external DC source do I need to feed the 12 V input on this PicoPSU-150-XT?

A 12 V DC power brick or battery capable of supplying at least 150 W is required; the unit converts that input to ATX rails for the motherboard.

Will the 24-pin ATX connector on this PicoPSU-150-XT fit my older motherboard that still uses a 20-pin socket?

The 24-pin plug is keyed so the extra four pins can overhang a 20-pin socket; it will seat correctly as long as the board follows the ATX layout.

How can I confirm the PicoPSU-150-XT is delivering power after I clip it into the motherboard?

The system will POST and the operating system will load; with no fan the only audible sign is silence, so a successful boot is the practical verification.

Tudi v tem oddelku

Stranke so primerjale tudi te

Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.