Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.

Articoli preferiti Accedi
Compact 24-pin ATX power module, fanless with solid polymer capacitors

Mini-Box

Mini-Box PicoPSU-150-XT 12V 150W ATX power supply

SKU CH-MYTS-PW3TM

A 150W ATX power supply that clips into the motherboard 24-pin socket, runs fanless at over 96% efficiency and uses solid polymer capacitors from Japan

  • TypeAT
  • 24-pin DC-DC ATX clips straight into the motherboard socket
  • Over 96 % efficiency with 100 % fanless operation
  • Solid polymer capacitors sourced from Japan for long life
  • 12 V input delivers 150 W continuous output
  • AT form factor fits compact builds without extra cables

PicoPSU-150-XT 12V 150W ATX power supply

This new DC-DC ATX unit clips directly into the motherboard 24-pin socket, eliminating the bulk of a standard PSU. Solid polymer capacitors from Japan and over 96% efficiency support long-term reliability in a completely fanless design.

Builders needing a tiny silent ATX supply

It suits compact systems that run on a 12V external brick and have modest power requirements. Builds requiring more than 150W, multiple high-current 12V rails, or an integrated AC inlet should consider a different form factor.

150W ceiling defines comfortable loads

The supply powers modern low-TDP processors, integrated graphics, storage drives and essential peripherals within its 150W envelope. Exceeding this limit risks instability, so total system draw must stay below the rated maximum.

Punti di forza

  • 24-pin DC-DC ATX clips straight into the motherboard socket
  • Over 96 % efficiency with 100 % fanless operation
  • Solid polymer capacitors sourced from Japan for long life
  • 12 V input delivers 150 W continuous output
  • AT form factor fits compact builds without extra cables

Caratteristiche tecniche

TypeAT

Domande su questo articolo

What external DC source do I need to feed the 12 V input on this PicoPSU-150-XT?

A 12 V DC power brick or battery capable of supplying at least 150 W is required; the unit converts that input to ATX rails for the motherboard.

Will the 24-pin ATX connector on this PicoPSU-150-XT fit my older motherboard that still uses a 20-pin socket?

The 24-pin plug is keyed so the extra four pins can overhang a 20-pin socket; it will seat correctly as long as the board follows the ATX layout.

How can I confirm the PicoPSU-150-XT is delivering power after I clip it into the motherboard?

The system will POST and the operating system will load; with no fan the only audible sign is silence, so a successful boot is the practical verification.

Anche in questo reparto

Anche i clienti hanno confrontato questi

Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.