Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.

Spremljani izdelki Prijava
Silver 2U AT mining PSU 240x110x58mm with ten 6-pin PCIe cables 400mm

myVolts

myVolts 1800W 2U AT Mining Power Supply 10x PCI-E 6-Pin 400mm

SKU CH-22KG-8N113

1800 W AT power supply for mining rigs with ten 400 mm PCI-E 6-pin connectors

  • TypeAT
  • 1800 W output powers demanding mining rigs
  • Ten PCI-E 6-pin connectors each 400 mm long feed multiple GPUs
  • 175–240 V input range suits global mains supplies
  • Compact 2U form factor fits 240 × 110 × 58 mm server chassis
  • Built-in input and output switches simplify power control

1800W Mining Power Supply

This 1800W AT power supply is built for mining rigs that run multiple GPUs or ASIC units such as the Antminer S9, S7, L3+ or D3. It accepts an input range of 175V to 240V and includes both input and output switches for direct control.

Metal Chassis with Ten PCI-E Connectors

The silver metal housing measures 240mm by 110mm by 58mm and fits a 2U rack footprint. Ten PCI-E 6-pin cables each 400mm long connect up to six graphics cards or miner boards without extra adapters.

Single 8cm Fan Cooling

One 8cm fan moves air through the compact chassis to manage thermals at full 1800W load. The metal body aids heat dissipation while the fan speed responds to power draw, keeping noise proportional to the mining workload.

Poudarki

  • 1800 W output powers demanding mining rigs
  • Ten PCI-E 6-pin connectors each 400 mm long feed multiple GPUs
  • 175–240 V input range suits global mains supplies
  • Compact 2U form factor fits 240 × 110 × 58 mm server chassis
  • Built-in input and output switches simplify power control

Specifikacije

TypeAT

Vprašanja o tem izdelku

What input voltage range does the 1800W AT power supply accept?

The unit operates on 175V to 240V AC input, so it requires a mains supply within that window and will not start on standard 110V circuits.

Will the 240mm long, 58mm high chassis fit in a standard 2U rack slot?

At 240mm wide, 110mm deep and 58mm tall it matches a 2U form factor, but verify your rack’s usable depth and cable bend radius before mounting.

How do I safely connect the ten 6-pin PCIe cables to my GPUs?

Switch the PSU off at both input and output toggles, seat each 400mm 6-pin connector fully until the latch clicks, then power on — skipping the output switch is the common mistake.

Tudi v tem oddelku

Stranke so primerjale tudi te

Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.