Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.

Spremljani izdelki Prijava
Green rectangular circuit board with silver components and screw terminals, 115 by 65 mm

myVolts

myVolts 24V 6-9A 150W AC-DC Power Supply Module

SKU CH-AJN5-7675V

Converts 100-240 V AC to 24 V DC at up to 9 A with 150 W continuous power and built-in protection

  • TypeAT
  • Universal 100-240V AC input suits global mains
  • 24V DC output delivers up to 150W continuous power
  • Peak capacity reaches 220W for short bursts
  • Compact 115x65mm board fits tight enclosures
  • Overcurrent, overload and short-circuit protections guard connected gear

Industrial AC-DC module for 24 V systems

This myVolts power supply module converts AC 100-240 V at 50/60 Hz to a regulated 24 V DC output. It delivers 6-9 A for a continuous 150 W rating with a 220 W peak. The open-frame board suits embedded equipment, test benches and custom enclosure builds.

Ripple below 150 mV with full protection suite

Noise ripple stays under 150 mV across the load range. Overcurrent, overload and short-circuit protection circuits are integrated on the board. The 115x65 mm footprint mounts on 105.8x55.7 mm hole centres for secure installation.

Replaces bulkier linear or lower-wattage switchers

This unit upgrades setups that need more headroom than a 100 W module provides without the volume of a cased supply. It is not for builders who require a housed unit with IEC inlet or those needing adjustable voltage rails.

Poudarki

  • Universal 100-240V AC input suits global mains
  • 24V DC output delivers up to 150W continuous power
  • Peak capacity reaches 220W for short bursts
  • Compact 115x65mm board fits tight enclosures
  • Overcurrent, overload and short-circuit protections guard connected gear

Specifikacije

TypeAT

Vprašanja o tem izdelku

How do I mount the 115x65mm board using the 105.8x55.7mm hole pattern?

Align the four mounting holes to the 105.8x55.7mm spacing and secure with M3 standoffs; the step people miss is leaving clearance under the board for airflow.

Which components typically need replacement after extended operation?

The internal electrolytic capacitors are the first parts to age; plan to swap them after several years of continuous 150W load.

At what point does thermal protection engage during sustained 150W output?

The unit will trigger overload protection when internal temperatures exceed safe limits, typically before reaching the 220W peak rating.

Tudi v tem oddelku

Stranke so primerjale tudi te

Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.