Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.

Bevakade produkter Logga in
Green rectangular circuit board with silver components and screw terminals, 115 by 65 mm

myVolts

myVolts 24V 6-9A 150W AC-DC Power Supply Module

SKU CH-AJN5-7675V

Converts 100-240 V AC to 24 V DC at up to 9 A with 150 W continuous power and built-in protection

  • TypeAT
  • Universal 100-240V AC input suits global mains
  • 24V DC output delivers up to 150W continuous power
  • Peak capacity reaches 220W for short bursts
  • Compact 115x65mm board fits tight enclosures
  • Overcurrent, overload and short-circuit protections guard connected gear

Industrial AC-DC module for 24 V systems

This myVolts power supply module converts AC 100-240 V at 50/60 Hz to a regulated 24 V DC output. It delivers 6-9 A for a continuous 150 W rating with a 220 W peak. The open-frame board suits embedded equipment, test benches and custom enclosure builds.

Ripple below 150 mV with full protection suite

Noise ripple stays under 150 mV across the load range. Overcurrent, overload and short-circuit protection circuits are integrated on the board. The 115x65 mm footprint mounts on 105.8x55.7 mm hole centres for secure installation.

Replaces bulkier linear or lower-wattage switchers

This unit upgrades setups that need more headroom than a 100 W module provides without the volume of a cased supply. It is not for builders who require a housed unit with IEC inlet or those needing adjustable voltage rails.

I korthet

  • Universal 100-240V AC input suits global mains
  • 24V DC output delivers up to 150W continuous power
  • Peak capacity reaches 220W for short bursts
  • Compact 115x65mm board fits tight enclosures
  • Overcurrent, overload and short-circuit protections guard connected gear

Specifikationer

TypeAT

Frågor om den här produkten

How do I mount the 115x65mm board using the 105.8x55.7mm hole pattern?

Align the four mounting holes to the 105.8x55.7mm spacing and secure with M3 standoffs; the step people miss is leaving clearance under the board for airflow.

Which components typically need replacement after extended operation?

The internal electrolytic capacitors are the first parts to age; plan to swap them after several years of continuous 150W load.

At what point does thermal protection engage during sustained 150W output?

The unit will trigger overload protection when internal temperatures exceed safe limits, typically before reaching the 220W peak rating.

Även i den här avdelningen

Andra har jämfört dessa

Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.