NEMIX RAM
NEMIX RAM 128GB (8x16GB) DDR5 4800 CL40 ECC RDIMM memory upgrade for HP Z4 G5 Workstation
Eight 16 GB DDR5 ECC registered DIMMs totalling 128 GB at 4800 MT/s CL40 for the HP Z4 G5 workstation
- Capacity128GB (8 x 16GB)
- SpeedDDR5 4800 (PC5 38400)
- ECCYes
- Buffered/RegisteredRegistered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.10V
- 128GB total capacity across 8 modules for heavy workloads
- DDR5 4800 speed with PC5-38400 bandwidth for fast data throughput
- ECC registered design detects and corrects memory errors automatically
- CL40 latency at 1.1V for stable low-voltage operation
- 288-pin 1Rx8 RDIMM form factor built for HP Z4 G5 compatibility
HP Z4 G5 memory kit
This 128 GB kit contains eight 16 GB DDR5 RDIMM modules built for the HP Z4 G5 workstation. Registered ECC operation protects data integrity in professional workloads. The modules run at 4800 MT/s with a CL40 latency at 1.1 V. No heat spreaders are fitted.
Upgrading from lower capacity or non-ECC
The kit replaces smaller DDR5 configurations or non-ECC memory that cannot meet workstation stability requirements. The jump is worth it when ECC error correction and registered signalling are mandated by the platform. Systems already populated with 128 GB of identical spec gain no further benefit.
128 GB headroom for multi-tasking workloads
Eight ranks of 1Rx8 density give ample headroom for virtualisation, large datasets and concurrent applications. The 4800 MT/s rate and CL40 timing suit the Z4 G5 memory controller without overclocking. Workloads that exceed 128 GB or require higher bandwidth will need a platform with greater memory capacity or speed.
Poudarki
- 128GB total capacity across 8 modules for heavy workloads
- DDR5 4800 speed with PC5-38400 bandwidth for fast data throughput
- ECC registered design detects and corrects memory errors automatically
- CL40 latency at 1.1V for stable low-voltage operation
- 288-pin 1Rx8 RDIMM form factor built for HP Z4 G5 compatibility
Specifikacije
| Brand | NEMIX RAM |
|---|---|
| Series | HPE Server/Workstation Compatible Series Memory |
| Model | HPE DDR5 4800MHZ ECC RDIMM Registered Server Memory |
| Part Number | MR38400-618K8 |
| Capacity | 128GB (8 x 16GB) |
| Speed | DDR5 4800 (PC5 38400) |
| ECC | Yes |
| Buffered/Registered | Registered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | HPE |
| CAS Latency | CL40 |
| Heat Spreader | No |
| Type | 288-Pin DDR5 RDIMM |
| Rank | 1Rx8 |
| Features | DDR5 ECC Registered RDIMM Server Motherboard Compatible |
| Package Content | 128GB (8X16GB) DDR5 4800MHZ PC5-38400 1Rx8 1.1V CL40 288-PIN ECC RDIMM Registered Server Memory KIT |
Vprašanja o tem izdelku
Will these 288-pin DDR5 RDIMM modules fit the HP Z4 G5 workstation memory slots?
Yes, the kit is built as 288-pin DDR5 RDIMM modules that match the HP Z4 G5 workstation memory slot specification.
What is the correct order for populating the eight 1Rx8 modules during installation?
Follow the HP Z4 G5 service manual population sequence; the common mistake is skipping the designated first channel slots before filling the remaining banks.
When should the registered ECC RDIMM kit be replaced if ECC error counters start rising?
Replace the kit when the system logs show increasing corrected or uncorrected ECC error counts, indicating module degradation.
Tudi v tem oddelku
Stranke so primerjale tudi te
Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.



