Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.

Spremljani izdelki Prijava
Green circuit board DDR5 memory module with black chips no heat spreader

NEMIX RAM

NEMIX RAM 16GB DDR5 5200 CL44 288-Pin UDIMM SuperMicro 531AD-I C9Z790-CG memory upgrade

SKU CH-RTQF-P4QS1

16 GB DDR5 5200 UDIMM adds memory to compatible Supermicro systems with 1.1 V operation and CL44 timing

  • Capacity16GB
  • SpeedDDR5 5200 (PC5 41600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V

Capacity 16GB

  • 16 GB DDR5 5200 boosts desktop responsiveness
  • CL38 latency sharpens data access speed
  • 1 V operation reduces system power draw
  • 288-pin UDIMM fits SuperMicro 531AD-I and C9Z790-CG
  • Major OEM Samsung, Micron, Hynix chips ensure reliability

16GB DDR5 UDIMM for SuperMicro systems

This 16GB DDR5 module is built for SuperMicro desktop and workstation platforms including the SYS-531AD-I and C9Z790-CG. It targets users who need a direct, validated memory upgrade for those specific machines without guessing compatibility.

5200 MT/s speed with CL38 latency

Running at 5200 MT/s (PC5-41600) and CL38, the stick delivers modern DDR5 bandwidth for multitasking and content workloads. The single 1Rx8 rank and 1.10V operation keep power draw low, but the 16GB capacity will limit users running large virtual-machine fleets or heavy rendering queues.

Unbuffered non-ECC design with major-brand chips

Samsung, Micron or Hynix ICs are used on a bare green PCB without a heat spreader. The 288-pin UDIMM form factor drops into standard desktop DIMM slots, while the lack of ECC and buffering means it suits consumer-grade SuperMicro boards rather than registered-server channels.

Poudarki

  • 16 GB DDR5 5200 boosts desktop responsiveness
  • CL38 latency sharpens data access speed
  • 1 V operation reduces system power draw
  • 288-pin UDIMM fits SuperMicro 531AD-I and C9Z790-CG
  • Major OEM Samsung, Micron, Hynix chips ensure reliability

Specifikacije

BrandNEMIX RAM
SeriesSuperMicro Server/Workstation Compatible Series Memory
ModelSuperMicro DDR5 5200MHZ Non-ECC Unbuffered UDIMM
Part NumberMD41600-618K1
Capacity16GB
SpeedDDR5 5200 (PC5 41600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemSupermicro
CAS LatencyCL38
Heat SpreaderNo
Type288-Pin DDR5 UDIMM
Rank1Rx8
FeaturesDDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content16GB (1X16GB) DDR5 5200MHZ PC5-41600 1Rx8 1.1V CL44 288-PIN Non-ECC Unbuffered UDIMM

Druge različice tega modela

še 5 v isti paleti

Ista družina, različen pomnilnik, hladilnik ali takt — primerjajte, preden se odločite.

Vprašanja o tem izdelku

Will this NEMIX RAM 16GB DDR5 5200 module work in my SuperMicro SYS-531AD-I alongside any existing memory?

It is validated for the SYS-531AD-I and C9Z790-CG. Mixing with other modules is not tested; for best stability use identical speed, voltage and latency.

How can I verify the module runs at DDR5 5200 with CL38 after installation?

Enter the system BIOS or use a utility such as CPU-Z and check that the reported data rate is 5200 MT/s and the CAS latency reads 38.

What exactly ships in the package and is anything else required to install it?

The box contains one 16GB 288-pin DDR5 UDIMM. No extra parts are needed; the module plugs directly into a compatible motherboard slot.

Tudi v tem oddelku

Stranke so primerjale tudi te

Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.