Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.

Bevakade produkter Logga in
Green circuit board DDR5 memory module with black chips no heat spreader

NEMIX RAM

NEMIX RAM 16GB DDR5 5200 CL44 288-Pin UDIMM SuperMicro 531AD-I C9Z790-CG memory upgrade

SKU CH-RTQF-P4QS1

16 GB DDR5 5200 UDIMM adds memory to compatible Supermicro systems with 1.1 V operation and CL44 timing

  • Capacity16GB
  • SpeedDDR5 5200 (PC5 41600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V

Capacity 16GB

  • 16 GB DDR5 5200 boosts desktop responsiveness
  • CL38 latency sharpens data access speed
  • 1 V operation reduces system power draw
  • 288-pin UDIMM fits SuperMicro 531AD-I and C9Z790-CG
  • Major OEM Samsung, Micron, Hynix chips ensure reliability

16GB DDR5 UDIMM for SuperMicro systems

This 16GB DDR5 module is built for SuperMicro desktop and workstation platforms including the SYS-531AD-I and C9Z790-CG. It targets users who need a direct, validated memory upgrade for those specific machines without guessing compatibility.

5200 MT/s speed with CL38 latency

Running at 5200 MT/s (PC5-41600) and CL38, the stick delivers modern DDR5 bandwidth for multitasking and content workloads. The single 1Rx8 rank and 1.10V operation keep power draw low, but the 16GB capacity will limit users running large virtual-machine fleets or heavy rendering queues.

Unbuffered non-ECC design with major-brand chips

Samsung, Micron or Hynix ICs are used on a bare green PCB without a heat spreader. The 288-pin UDIMM form factor drops into standard desktop DIMM slots, while the lack of ECC and buffering means it suits consumer-grade SuperMicro boards rather than registered-server channels.

I korthet

  • 16 GB DDR5 5200 boosts desktop responsiveness
  • CL38 latency sharpens data access speed
  • 1 V operation reduces system power draw
  • 288-pin UDIMM fits SuperMicro 531AD-I and C9Z790-CG
  • Major OEM Samsung, Micron, Hynix chips ensure reliability

Specifikationer

BrandNEMIX RAM
SeriesSuperMicro Server/Workstation Compatible Series Memory
ModelSuperMicro DDR5 5200MHZ Non-ECC Unbuffered UDIMM
Part NumberMD41600-618K1
Capacity16GB
SpeedDDR5 5200 (PC5 41600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemSupermicro
CAS LatencyCL38
Heat SpreaderNo
Type288-Pin DDR5 UDIMM
Rank1Rx8
FeaturesDDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content16GB (1X16GB) DDR5 5200MHZ PC5-41600 1Rx8 1.1V CL44 288-PIN Non-ECC Unbuffered UDIMM

Andra versioner av den här modellen

5 till i samma serie

Samma familj, men olika minne, kylning eller klockfrekvens — jämför innan du bestämmer dig.

Frågor om den här produkten

Will this NEMIX RAM 16GB DDR5 5200 module work in my SuperMicro SYS-531AD-I alongside any existing memory?

It is validated for the SYS-531AD-I and C9Z790-CG. Mixing with other modules is not tested; for best stability use identical speed, voltage and latency.

How can I verify the module runs at DDR5 5200 with CL38 after installation?

Enter the system BIOS or use a utility such as CPU-Z and check that the reported data rate is 5200 MT/s and the CAS latency reads 38.

What exactly ships in the package and is anything else required to install it?

The box contains one 16GB 288-pin DDR5 UDIMM. No extra parts are needed; the module plugs directly into a compatible motherboard slot.

Även i den här avdelningen

Andra har jämfört dessa

Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.