Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.

Spremljani izdelki Prijava
Green circuit board SODIMM module with black memory chips and gold edge connector

NEMIX RAM

NEMIX RAM 4GB DDR3 1333 PC3-10600 204-Pin SODIMM POSIFLEX HS-3512W memory upgrade

SKU CH-ZX6B-0HVS8

A 4 GB DDR3 SODIMM module running at 1333 MHz for the POSIFLEX HS-3512W terminal

  • Capacity4GB
  • SpeedDDR3 1333 (PC3 10600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.50V
  • Designed for POSIFLEX HS-3512W all-in-one terminals
  • 4 GB DDR3 1333 MHz expands system memory
  • 35 V low-voltage modules reduce power draw
  • 204-pin SODIMM form factor fits compact slots
  • CL9 latency supports responsive point-of-sale operation

POSIFLEX HS-3512W Compatible SODIMM

This 4 GB DDR3 module is built specifically for the POSIFLEX HS-3512W compact all-in-one terminal with replaceable printer. It uses a 204-pin SODIMM form factor and operates at DDR3 1333 (PC3-10600) with CL9 latency. The unbuffered, non-ECC design matches the original system requirements for point-of-sale workloads.

Suited for HS-3512W upgrades only

Technicians servicing the named POSIFLEX terminal can install this stick directly without configuration changes. The 2Rx8 organisation and 1.35 V rating align with the platform's memory controller. Buyers maintaining other POS models, desktops, or laptops should verify their exact part number before ordering.

DDR3 1333 PC3-10600 speed grade

The decisive specification is the DDR3 1333 MHz rating (PC3-10600). Systems requiring a different DDR generation, a higher or lower data rate, or ECC functionality will not accept this module. Confirm the host terminal specifies PC3-10600 before purchase.

Poudarki

  • Designed for POSIFLEX HS-3512W all-in-one terminals
  • 4 GB DDR3 1333 MHz expands system memory
  • 35 V low-voltage modules reduce power draw
  • 204-pin SODIMM form factor fits compact slots
  • CL9 latency supports responsive point-of-sale operation

Specifikacije

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR3 1333MHZ Non-ECC Unbuffered SODIMM
Part NumberMS10600-428K1
Capacity4GB
SpeedDDR3 1333 (PC3 10600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.50V
Compatible SystemPOSIFLEX POS
CAS LatencyCL9
Heat SpreaderNo
Type204-Pin DDR3 SODIMM
Rank2Rx8
FeaturesDDR3 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content4GB (1X4GB) DDR3 1333MHZ PC3-10600 2Rx8 1.35V 204-PIN Non-ECC Unbuffered SODIMM

Vprašanja o tem izdelku

Should I pick the 4 GB module or look for a larger capacity?

This listing is a single 4 GB DDR3 SODIMM; the POSIFLEX HS-3512W only accepts one module, so 4 GB is the maximum memory the terminal can hold.

What does the 1333 MHz rating mean once the module is installed?

The module runs at 1333 MT/s with CL9 latency, delivering the standard DDR3-1333 bandwidth the HS-3512W chipset is designed for.

Is the 204-pin DDR3 interface compatible with the HS-3512W slot?

Yes — the 204-pin DDR3 SODIMM matches the terminal's memory socket exactly, and the 1.35 V low-voltage operation is within the platform's supported range.

Tudi v tem oddelku

Stranke so primerjale tudi te

Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.