Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Green circuit board SODIMM module with black memory chips and gold edge connector

NEMIX RAM

NEMIX RAM 4GB DDR3 1333 PC3-10600 204-Pin SODIMM POSIFLEX HS-3512W memory upgrade

SKU CH-ZX6B-0HVS8

A 4 GB DDR3 SODIMM module running at 1333 MHz for the POSIFLEX HS-3512W terminal

  • Capacity4GB
  • SpeedDDR3 1333 (PC3 10600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.50V
  • Designed for POSIFLEX HS-3512W all-in-one terminals
  • 4 GB DDR3 1333 MHz expands system memory
  • 35 V low-voltage modules reduce power draw
  • 204-pin SODIMM form factor fits compact slots
  • CL9 latency supports responsive point-of-sale operation

POSIFLEX HS-3512W Compatible SODIMM

This 4 GB DDR3 module is built specifically for the POSIFLEX HS-3512W compact all-in-one terminal with replaceable printer. It uses a 204-pin SODIMM form factor and operates at DDR3 1333 (PC3-10600) with CL9 latency. The unbuffered, non-ECC design matches the original system requirements for point-of-sale workloads.

Suited for HS-3512W upgrades only

Technicians servicing the named POSIFLEX terminal can install this stick directly without configuration changes. The 2Rx8 organisation and 1.35 V rating align with the platform's memory controller. Buyers maintaining other POS models, desktops, or laptops should verify their exact part number before ordering.

DDR3 1333 PC3-10600 speed grade

The decisive specification is the DDR3 1333 MHz rating (PC3-10600). Systems requiring a different DDR generation, a higher or lower data rate, or ECC functionality will not accept this module. Confirm the host terminal specifies PC3-10600 before purchase.

Přednosti

  • Designed for POSIFLEX HS-3512W all-in-one terminals
  • 4 GB DDR3 1333 MHz expands system memory
  • 35 V low-voltage modules reduce power draw
  • 204-pin SODIMM form factor fits compact slots
  • CL9 latency supports responsive point-of-sale operation

Specifikace

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR3 1333MHZ Non-ECC Unbuffered SODIMM
Part NumberMS10600-428K1
Capacity4GB
SpeedDDR3 1333 (PC3 10600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.50V
Compatible SystemPOSIFLEX POS
CAS LatencyCL9
Heat SpreaderNo
Type204-Pin DDR3 SODIMM
Rank2Rx8
FeaturesDDR3 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content4GB (1X4GB) DDR3 1333MHZ PC3-10600 2Rx8 1.35V 204-PIN Non-ECC Unbuffered SODIMM

Otázky k tomuto produktu

Should I pick the 4 GB module or look for a larger capacity?

This listing is a single 4 GB DDR3 SODIMM; the POSIFLEX HS-3512W only accepts one module, so 4 GB is the maximum memory the terminal can hold.

What does the 1333 MHz rating mean once the module is installed?

The module runs at 1333 MT/s with CL9 latency, delivering the standard DDR3-1333 bandwidth the HS-3512W chipset is designed for.

Is the 204-pin DDR3 interface compatible with the HS-3512W slot?

Yes — the 204-pin DDR3 SODIMM matches the terminal's memory socket exactly, and the 1.35 V low-voltage operation is within the platform's supported range.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.