Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.

Spremljani izdelki Prijava
Green circuit board with black chips, 260-pin SODIMM form factor

NEMIX RAM

NEMIX RAM 8GB DDR4 2400 CL17 2Rx8 260-PIN SODIMM POSIFLEX RT-6016 memory upgrade

SKU CH-WRS8-MYWZB

8GB DDR4 2400 CL17 SODIMM module built for the POSIFLEX RT-6016 terminal

  • Capacity8GB
  • SpeedDDR4 2400 (PC4 19200)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • Designed for POSIFLEX RT-6016 terminal compatibility
  • DDR4 2400 speed with CL17 latency for responsive operation
  • 2V low voltage reduces system power draw
  • 2Rx8 dual-rank layout maximises memory density
  • Rigorously stress-tested modules ensure reliable uptime

POSIFLEX RT-6016 DDR4 2400 SODIMM

This 8 GB DDR4 2400 module is built specifically for the POSIFLEX RT-6016 terminal. It uses a 260-pin SODIMM form factor and operates at 1.2 V with CL17 latency. The unbuffered, non-ECC design matches the original system requirements exactly.

Terminal operators needing a single 8 GB upgrade

This suits technicians maintaining a POSIFLEX RT-6016 who need a direct-replacement SODIMM validated for that platform. It is not for users requiring ECC error correction, registered buffering, higher capacities, or different pin counts such as 288-pin DIMMs.

Single stick with OEM-grade chips

The package contains one 8 GB SODIMM assembled with Samsung, Micron or Hynix components. No heat spreader, cables, software or additional modules are included, so installation is a straightforward swap into the existing slot.

Poudarki

  • Designed for POSIFLEX RT-6016 terminal compatibility
  • DDR4 2400 speed with CL17 latency for responsive operation
  • 2V low voltage reduces system power draw
  • 2Rx8 dual-rank layout maximises memory density
  • Rigorously stress-tested modules ensure reliable uptime

Specifikacije

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR4 2400MHZ Non-ECC Unbuffered SODIMM
Part NumberMS19200-828K1
Capacity8GB
SpeedDDR4 2400 (PC4 19200)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemPOSIFLEX POS
CAS LatencyCL17
Heat SpreaderNo
Type260-PIN DDR4 SODIMM
Rank2Rx8
FeaturesDDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content8GB (1X8GB) DDR4 2400MHZ PC4-19200 2Rx8 1.2V CL17 260-PIN Non-ECC Unbuffered SODIMM

Vprašanja o tem izdelku

Does the POSIFLEX RT-6016 terminal need an open SODIMM slot for this 260-PIN DDR4 module?

Yes, the upgrade installs in a standard 260-PIN DDR4 SODIMM slot on the POSIFLEX RT-6016 motherboard.

Will this CL17 DDR4 2400 stick work if I keep the original memory in the RT-6016?

The module is DDR4 2400 PC4-19200 CL17 1.2 V unbuffered non-ECC; matching speed, voltage and type lets it run alongside the factory memory.

How can I confirm the POSIFLEX RT-6016 sees the full 8 GB after installation?

Check BIOS or the OS memory report — it should show the additional 8 GB at DDR4 2400 with CL17 timings.

Tudi v tem oddelku

Stranke so primerjale tudi te

Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.