نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Green circuit board with black chips, 260-pin SODIMM form factor

NEMIX RAM

NEMIX RAM 8GB DDR4 2400 CL17 2Rx8 260-PIN SODIMM POSIFLEX RT-6016 memory upgrade

SKU CH-WRS8-MYWZB

8GB DDR4 2400 CL17 SODIMM module built for the POSIFLEX RT-6016 terminal

  • Capacity8GB
  • SpeedDDR4 2400 (PC4 19200)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • Designed for POSIFLEX RT-6016 terminal compatibility
  • DDR4 2400 speed with CL17 latency for responsive operation
  • 2V low voltage reduces system power draw
  • 2Rx8 dual-rank layout maximises memory density
  • Rigorously stress-tested modules ensure reliable uptime

POSIFLEX RT-6016 DDR4 2400 SODIMM

This 8 GB DDR4 2400 module is built specifically for the POSIFLEX RT-6016 terminal. It uses a 260-pin SODIMM form factor and operates at 1.2 V with CL17 latency. The unbuffered, non-ECC design matches the original system requirements exactly.

Terminal operators needing a single 8 GB upgrade

This suits technicians maintaining a POSIFLEX RT-6016 who need a direct-replacement SODIMM validated for that platform. It is not for users requiring ECC error correction, registered buffering, higher capacities, or different pin counts such as 288-pin DIMMs.

Single stick with OEM-grade chips

The package contains one 8 GB SODIMM assembled with Samsung, Micron or Hynix components. No heat spreader, cables, software or additional modules are included, so installation is a straightforward swap into the existing slot.

أبرز المميزات

  • Designed for POSIFLEX RT-6016 terminal compatibility
  • DDR4 2400 speed with CL17 latency for responsive operation
  • 2V low voltage reduces system power draw
  • 2Rx8 dual-rank layout maximises memory density
  • Rigorously stress-tested modules ensure reliable uptime

المواصفات

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR4 2400MHZ Non-ECC Unbuffered SODIMM
Part NumberMS19200-828K1
Capacity8GB
SpeedDDR4 2400 (PC4 19200)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemPOSIFLEX POS
CAS LatencyCL17
Heat SpreaderNo
Type260-PIN DDR4 SODIMM
Rank2Rx8
FeaturesDDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content8GB (1X8GB) DDR4 2400MHZ PC4-19200 2Rx8 1.2V CL17 260-PIN Non-ECC Unbuffered SODIMM

أسئلة حول هذا المنتج

Does the POSIFLEX RT-6016 terminal need an open SODIMM slot for this 260-PIN DDR4 module?

Yes, the upgrade installs in a standard 260-PIN DDR4 SODIMM slot on the POSIFLEX RT-6016 motherboard.

Will this CL17 DDR4 2400 stick work if I keep the original memory in the RT-6016?

The module is DDR4 2400 PC4-19200 CL17 1.2 V unbuffered non-ECC; matching speed, voltage and type lets it run alongside the factory memory.

How can I confirm the POSIFLEX RT-6016 sees the full 8 GB after installation?

Check BIOS or the OS memory report — it should show the additional 8 GB at DDR4 2400 with CL17 timings.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.