Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.

Spremljani izdelki Prijava
Green bare circuit board with black memory chips and gold edge connectors

NEMIX RAM

NEMIX RAM 8GB DDR5 4800MHz CL40 1.1V UDIMM Dell Tower memory upgrade

SKU CH-27VW-A3DJE

8 GB DDR5 desktop module running at 4800 MHz with CL40 latency and 1.1 V operation for Dell Tower systems

  • Capacity8GB
  • SpeedDDR5 4800 (PC5 38400)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • Boost system responsiveness with 8GB DDR5 4800MHz CL40 memory
  • Lower power draw at 1.1V for efficient desktop operation
  • Reliable signal integrity using major OEM Samsung Micron Hynix chips
  • Simple drop-in upgrade for compatible Dell Tower desktops
  • Unbuffered non-ECC 288-pin UDIMM installs in minutes

Dell Tower DDR5 memory upgrade

This 8GB DDR5 UDIMM is built for Dell tower desktops that accept non-ECC unbuffered memory at 4800MHz. It suits owners who want a straightforward capacity increase without ECC or registered modules. The single-rank 1Rx8 organisation keeps the electrical load light for the memory controller.

Before ordering, check compatibility

Verify that your Dell tower motherboard supports DDR5 UDIMMs at 4800MHz and does not require ECC or registered DIMMs. Confirm the board has a free 288-pin slot and that the BIOS recognises 1.10V modules. The module has no heat spreader, so ensure the chassis airflow can reach the memory area.

Sustained-load behaviour

The module runs at the standard 1.10V DDR5 voltage, so power draw remains steady during long sessions. CL40 latency is fixed by the JEDEC profile and does not tighten under load. Without a heat spreader, the DRAM relies on case airflow to maintain temperature during extended workloads.

Poudarki

  • Boost system responsiveness with 8GB DDR5 4800MHz CL40 memory
  • Lower power draw at 1.1V for efficient desktop operation
  • Reliable signal integrity using major OEM Samsung Micron Hynix chips
  • Simple drop-in upgrade for compatible Dell Tower desktops
  • Unbuffered non-ECC 288-pin UDIMM installs in minutes

Specifikacije

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR5 Non-ECC Unbuffered UDIMM Memory
Part NumberMD38400-818K1
Capacity8GB
SpeedDDR5 4800 (PC5 38400)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemDell
CAS LatencyCL40
Heat SpreaderNo
Type288-Pin DDR5 UDIMM
Rank1Rx8
FeaturesDDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content8GB (1 x 8GB) DDR5 4800MHz PC5-38400 1Rx8 1.1V 288-PIN Non-ECC UDIMM

Vprašanja o tem izdelku

Does the box contain only the 8 GB DDR5 4800 MHz UDIMM or are extra parts such as a heat spreader included?

The package includes one 8 GB 288-pin DDR5 4800 MHz CL40 1.1 V UDIMM; no heat spreader or other accessories are supplied.

Should I choose a different capacity or speed for my Dell Tower, or is this 8 GB 4800 MHz module the right match?

This module is built to Dell Tower specifications at 4800 MHz CL40 1.10 V; select it when your system calls for that exact speed and voltage.

What does the 4800 MHz rating deliver once the stick is installed in my Dell Tower?

It runs at the standard DDR5 4800 MT/s data rate with CL40 latency at 1.10 V, giving the memory bandwidth your Dell Tower expects from a PC5-38400 UDIMM.

Tudi v tem oddelku

Stranke so primerjale tudi te

Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.